| Technical Specifications |
24VDC-24VDC, 120 Watts, Isolated
P/N: SMP-BAC-V06-24VDC-01
 Refer to datasheet. |
| Input: |
11-32V continuous power source (12V or 24V nominal)
|
| Output: |
24V clean DC signal regulated at 1% error
Output Power: 100/124VA nominal
Output Current: 4.12/5.2A continuous |
| Protection: |
Reverse voltage + surge |
| Isolation: |
Isolated from output and chassis ground |
| Compliance: |
EMC
Emissions EN 50081-2
Immunity EN 50082-2
ONÂ REQUEST, we can offer the following.
IT Class 2
(UL Recognized to UL1950, CUL Recognized to CAN/CSA-C22.2 No. 95095)
|
| Rating: |
IP67 |
Packaging
and Dimensions: |
Extruded Aluminum housing with stainless steel end plates
5.50 x 6.77 x 2.37 inches
139.7 x 172.0 x 60.3 mm
(W x L x H)
|
| Electrical Connections: |
4 pin connector Deutsch IPD P/N : DT13-4P Comes with mating wire harness assembly - 4 pin plug Deutsch IPD P/N:DT06-4S assembly with 2 m (6.5 ft.) of 16 AWG unterminated lead wires |
| Operating Temperature: |
-40 to 70 degrees C (-40 to 158 degrees F) |
| Order codes: |
Converter:
SMP-BAC-V06-24VDC-01
Mating wire harness:
WH-DT06-4S-S-16AWG-2M |