1 Universal Input, Dual Valve Controller with CAN bus

The 1 Universal Input, Dual Valve Controller is a highly programmable electronic valve controller. The machine designer can configure the electronic control for their vehicle application. Its sophisticated control algorithms allow for open or closed loop drive of the proportional outputs to actuate hydraulic solenoids. It can be operated as either a self-contained control system, driving the valves directly from the on-board inputs, and/or it can be integrated into a CAN J1939 or CANopen network of controllers. All I/O and logical function blocks on the unit are inherently independent from one another, but can be programmed to interact in a large number of ways. As an electrohydraulic component, it provides precise, repeatable electronic control of 2 proprotional or on/off hydraulic valves in response to CAN messages or one voltage, current, and/or other signal inputs from a joystick, switch or ECU in off-highway construction equipment, material handling machines and other vehicles. It is ruggedly packaged with IP67 protection.

Technical Specifications: 1 Universal Input, Dual Valve Controller (with SAE J1939 or CANopen®) Order code: P/N: AX022000 (SAE J1939) P/N: AX022001 (CANopen®) Inputs: 1 user programmable universal signal input (Voltage, Current, Resitive, Digital, PWM, Frequency/RPM) Voltage Reference: 1 +5V, 10 mA Outputs: High Side (sourcing) Drives up to 2 Proportional or On/Off Valves (up to 3A each) Outputs are user programmable to drive: proportional current (up to 3A each); hotshot digital current; proportional voltage (up to supply); proportional PWM; or straight on/off digital loads. Power: 8…60VDC (12V, 24V or 48VDC nominal) Control Logic: Standard embedded software with user programmable setpoints and control profiles (Refer to datasheet.) User Configurability: Model AX022000: Electronic Assistant®, P/N: AX070502 Model AX022001: .EDS provided to interface to standard CANopenŽ tools (Refer to datasheet.) Packaging: Aluminum enclosure Integral Deutsch IPD connector Encapsulated, Nitrile Gasket, IP67 2.15 x 4.76 x 1.76 inches 54.61 x 120.91 x 44.75 mm L x W x H including integral connector Communications: 1 CAN Model AX022000 with SAE J1939 Model AX022001 with CANopen® PDF Datasheet: Click icon for PDF datasheet (for P/N: AX022000) Click icon for PDF datasheet (for P/N: AX022001)

Applications: Industrial, off-highway (mobile) and marine applications for the control of hydraulic valves Interface with a diesel engine’s electronic control module PWM signal to drive accessories Hydraulic Valve Controllers