The 16 Universal Signal Input/Analog Output CAN Controller can extend machine control networks by adding I/O to the CAN bus. This controller features 1 CAN port for user-defined communications over the bus. It
accepts up to 8 analog (0-5V, 0-10V, 0-20 mA or 4-20 mA) or digital or PWM frequency inputs and provides 8 analog outputs (0-5V, 0-
10V, +/-5V, +/-10V, 0-20 mA, 4-20 mA). Diagnostics messages are provided over the CAN network for the
status of inputs or outputs. A RS-232 port is provided for user configuration via PC or for diagnostic purposes.
The controller belongs to a family of Axiomatic smart controllers with programmable internal architecture. This provides
users with flexibility, allowing them to build their own custom controller with a required functionality from a set of predefined
internal functional blocks using the PC-based Axiomatic Electronic Assistant® software tool. Application programming is
performed through the CAN interface, without disconnecting the controller from the user’s system.
Analog input/output module, IP65 rated rugged housing with watertight connectors
|16 Universal Signal Input/Analog Output Module with CAN (SAE J1939)
||8 inputs are user selectable from the following:
0-5V, 0-10V, 4-20 mA or 0-20 mA
Digital inputs for interface to switches, etc.
PWM signal, pulse or 16-bit counter inputs from sensors or
diesel engine ECM’s
Enable or disable input commands
||8 analog outputs (0-5V, 0-10V, +/-5V, +/-10V,
0-20 mA, 4-20 mA)
(12VDC, 24VDC nominal)
||SAE J1939 (CANopen: P/N AX030201)
||Standard embedded software
(For application-specific control logic, contact manufacturer.)
||P/N: AX070502 The Electronic Assistant®) is a software configuration tool that runs on the Windows operating
system and is connected to a J1939 bus via an USB to CAN converter.
8-pin connector -
Deutsch IPD DT13-08PA
40-pin connector - Deutsch IPD DRC13-40PA
Aluminum extrusion with stainless steel end plates.
5.86 x 5.60 x 2.87 inches
149.00 x 142.24 x 73.00 mm
(W x L x H excluding mating connectors)
||-40 to +85°C
|| Click icon for PDF datasheet
- Power Generation
- Stationary Power
- Large Engines
Analog I/O & Distributed Controls