|
Controls for brushless dc motors, motor drives, variable speed drive, motor speed control, BLDC motor, DC motor, ac motor, dc motor used in fuel cells, material handling equipment and electric vehicles. CAN bus network for machine control.
Brushless DC Motor Controller
- Drives a 12 or 24V or 48VDC BLDC motor
- Smooth and precise speed control using position feedback from Hall-effect sensors
- External speed control with a command input signal
- Designed for high efficiency and reliability
- Compact and cost-effective power control
- Communicates over CAN on a machine control network
Applications:
Motor Controllers
|
| Technical Specifications: |
Brushless DC Motor Controller
|
| Order Code: |
P/N: AX100200 |
| Multi-functional speed command input: |
1 Analog Input (0-5V, 0-10V, 0-20mA, 4-20mA selectable)
2 Digital Inputs for enable and direction control |
| Position feedback with sensors: |
Interfaces to 3 Hall Effect Position Sensors integrated into the motor. |
| Drive Output: |
Speed control of one BLDC motor (12/24/48V, up to 25A) |
| Other Outputs: |
1 Pulse Frequency Modulation (PFM) output (at battery voltage level) for reading and monitoring RPM (Active low with pull-up) |
| Reference Voltage: |
+5 Volts, 5 mA |
| Power: |
12V, 24V or 48V nominal power supply
(8..60V range) |
| Control logic: |
Standard embedded software
(For application-specific requirements, contact the manufacturer with a specification.) |
| Communications: |
SAE J1939
RS-232 |
| Configuration: |
Electronic Assistant® (EA) |
| Operating Modes: |
Open loop or closed loop speed control (user configurable)
Regenerative braking supported
Power or current limiting (user configurable) |
| Packaging: |
Aluminum extrusion with stainless steel end plates
Potted
5.50 x 6.77 x 2.39 inches
139.7 x 172.0 x 60.6 mm
(WxLxH excluding mating plug)
4 connectors (Refer to datasheet.) |
| Protection Rating: |
IP67 |
| Operating Conditions: |
-40 to +85°C (-40 to 185°F) |
| PDF Datasheet: |
 Click icon for PDF datasheet |
|
|
