Need a quote? Contact us. +1 905 602 9270 or sales@axiomatic.com

AX030200: 16 Analog I/O Module

The 16 Universal Signal Input/Analog Output CAN Controller can extend machine control networks by adding I/O to the CAN bus. This controller features 1 CAN port for user-defined communications over the bus. It accepts up to 8 analog (0-5V, 0-10V, 0-20 mA or 4-20 mA) or digital or PWM frequency inputs and provides 8 analog outputs (0-5V, 0- 10V, +/-5V, +/-10V, 0-20 mA, 4-20 mA). Diagnostics messages are provided over the CAN network for the status of inputs or outputs. A RS-232 port is provided for user configuration via PC or for diagnostic purposes.

The controller belongs to a family of Axiomatic smart controllers with programmable internal architecture. This provides users with flexibility, allowing them to build their own custom controller with a required functionality from a set of predefined internal functional blocks using the PC-based Axiomatic Electronic Assistant® software tool. Application programming is performed through the CAN interface, without disconnecting the controller from the user’s system.

Applications


  • Power Generation
  • Cogeneration
  • Stationary Power
  • Large Engines
Technical Specifications:16 Analog I/O Module
Order Code:P/N: AX030200
Power:9…32VDC
(12VDC, 24VDC nominal)
Inputs:8 inputs are user selectable from the following:
0-5V, 0-10V, 4-20 mA or 0-20 mA
Digital inputs for interface to switches, etc.
PWM signal, pulse or 16-bit counter inputs from sensors or diesel engine ECM’s
Enable or disable input commands
Outputs:8 analog outputs (0-5V, 0-10V, +/-5V, +/-10V, 0-20 mA, 4-20 mA)
Control logic:Standard embedded software
(For application-specific control logic, contact manufacturer.)
Communications:SAE J1939 (CANopen: P/N AX030201)
1 RS-232
User Configurability:P/N: AX070502 The Electronic Assistant®) is a software configuration tool that runs on the Windows operating system and is connected to a J1939 bus via an USB to CAN converter.
Packaging:8-pin connector - Deutsch IPD DT13-08PA
40-pin connector - Deutsch IPD DRC13-40PA

Aluminum extrusion with stainless steel end plates.
5.86 x 5.60 x 2.87 inches
149.00 x 142.24 x 73.00 mm
(W x L x H excluding mating connectors)
Protection Rating:IP67
Operating Conditions:-40 to 85°C (-40 to 185°F)
PDF Datasheet: Click icon for PDF datasheet.

This is a unique website which will require a more modern browser to work!

Please upgrade today!