Need a quote? Contact us. +1 905 602 9270 or sales@axiomatic.com

AX02231x: Dual Plug-In Valve Controller

The Dual Plug-In Hydraulic Valve Controller is a user programmable distributed electronic control. The machine designer can configure the electronic control for their agricultural equipment or construction machine application. Its sophisticated control algorithms allow for open or closed loop drive of the proportional outputs to actuate hydraulic solenoids. The control is designed to be mounted directly on the hydraulic valve with molded Deutsch IPD connectors and provides distributed control on the mobile machine. It is integrated into a CANopen or SAE J1939 network. All outputs and logical function blocks on the unit are inherently independent from one another, but can be programmed to interact in a number of ways. As an electrohydraulic component, it provides precise, repeatable electronic control of 2 proprotional or on/off hydraulic valves in response to CAN message. It is ruggedly packaged with IP67 protection.

A single output plug-in valve controller is also available.

Applications


  • Agricultural equipment, off-highway (mobile) equipment component for the control of hydraulic valves
Technical Specifications:Dual Plug-In Valve Controller, SAE J1939
Order Codes:P/N: AX022310 (SAE J1939)
P/N: AX022311 (CANopen®)
Power: 12V or 24Vdc nominal
Inputs:CAN bus
Outputs:High Side (sourcing)
Drives up to 2 Proportional or On/Off Hydraulic Valves
(up to 2.5A each)

Outputs are user programmable to drive: proportional current (up to 2.5A each); hotshot digital; proportional PWM; or straight on/off digital loads.
Control logic:Standard embedded software with user programmable setpoints and control profiles (Refer to datasheet.)
User Configurability:Model AX022311: Electronic Assistant®, P/N: AX070502

Model AX022310: .EDS is provided to interface to standard CANopen® tools
(Refer to datasheet.)
Communications:1 CAN 2.0B port
Model AX022310 with SAE J1939
Models AX022311 with CANopen® (CiA DS-404)
Packaging:Molded Enclosure, IP67
Polyester with 15% Glass and Silicone Seal
Integral connectors (Deutsch IPD P/N: DT06-2S and DT04-6P)
3.037 x 1.44 x 1.53 inches
77.1 x 36.6 x 38.8 mm
L x W x H including integral connector
Operating Conditions:-40 to 85ºC (-40 to 185ºF)
PDF Datasheet: Click icon for PDF datasheet - AX022310
Click icon for PDF datasheet - AX022311

This is a unique website which will require a more modern browser to work!

Please upgrade today!