IFC-W1R-TTL-RS232-01-000
Description:
The IFC-W1R-TTL-RS232-01 is an interface which converts communication signals between the TTL and RS-232 signal levels. This interface is ideal for providing RS-232 communication capabilities for microcontroller circuits which currently do not have RS-232 level interface. The TTL to RS-232 Interface derives its power from the microcontroller board. Connections include: Transmit Data (TXD); Receive Data (RXD); Request to Send (RTS); and Clear to Send (CTS).
Technical Specifications:
|
RS-232 SIDE:
|
|
|
Output Swing
Input Voltage Range
Output Short Circuit Current
|
+/- 8 V typical
+/-30 V maximum
+/-22 mA
|
|
TTL SIDE:
|
|
|
Input Logic Low
Input Logic High
Output Logic Low
Output Logic High
Output Short Circuit Current
|
0.8 V
2.0 V min.
0.4 V max.
3.5 V min.
10 mA Sourcing V out = GND
15 mA Sinking V out = VCC
|
|
POWER SUPPLY:
|
|
|
Operating Supply Voltage Resistance
VCC Supply Current
|
4.5 V min., 5.5 V max.
4 mA typical no load, 10 mA max. no load
15 mA typical 30 kOhm load on both Ouputs
|
Data Rate: 200 KBits/Sec
Pinout:
| TTL: |
1 - GND
2 - +5 V
3 - TXD To RS-232
4 - RTS To RS-232
5 - RXD From RS-232
6 - CTS From RS-232
7 - +5 V
8 - GND
|
| RS-232: |
2 - TX From TTL
3 - RX To TTL
4 - Connected to Pin 6
5 - GND
6 - Conected to Pin 4
7 - CTS to TTL
8 - RTS From TTL
|
- Connectors :
- TTL: 8-Pin Molex with 3 Feet Wires, Pre-Tinned on Ends
- RS-232: DB-9 Female
- Packaging: Rail Mount
- Dimensions: 80 x 30.8 x 40 mm (L x W x H including rail mount)
-
- Ordering Part Number
- IFC-W1R-TTL-RS232-01-000
(rail mount, no cable)
- Other variations are available without packaging, a choice of cable termination and varying cable lengths.
Specifications are subject to change without notice.
|