| Technical Specifications: |
PWM to Current (or Voltage) Signal Converter |
| Order Codes: |
P/N: AX130200 (PWM to 0-20 mA output)
P/N: AX130201 (PWM to 4-20 mA output)
P/N: AX130202 (PWM to 0-5V output)
P/N: AX13020 (PWM to 0-10V output)
|
| Input
Specifications |
| PWM Input: |
PWM
50 Hz to 50 kHz
0 to 100% D.C. |
| Input Voltage: |
Low <1.5V, High >3.5V (50V max.), TTL and CMOS
compatible |
| Input Impedance: |
200 kOhms |
| Output Specifications |
| Response Time: |
100 mSec. |
| Voltage Output: |
Fully isolated
Active output
0-5 VDC (AX130202)
0-10 VDC (AX130203) |
| Current Output: |
Fully isolated
0-20 mA (AX130200)
4-20 mA (AX130201) |
| Output Impedance: |
1 Ohm, Transient protection, Short circuit protection |
| Compliance Voltage: |
8.8VDC |
| Adjustments |
Span and Offset (Zero) are factory set. |
| Protection: |
IP20 |
| Power Supply: |
12VDC or 24VDC nominal
(8-36VDC range)
Transient and Overvoltage protection provided. |
| Packaging: |
PCB is conformal coated
Housing (Wieland WEG8), Polyamide 6.6 plastic, UL94V-0
DIN rail mount, 35 mm
2.38 x 3.56 x 1.12 inches
60.6 x 90.5 x 28.5 mm (W x H x D)
excluding DIN rail
|
| Electrical Connection: |
#12 to #22 AWG screw terminals |
| Operating Conditions: |
-40 to 85 degrees C (-40 to 185 degrees F), 0-95%
relative humidity |
| PDF Datasheet: |
 Click icon for PDF Datasheet |
