Need a quote? Contact us. +1 905 602 9270 or

AX06020x: Inclinometer with CAN

The inclinometer is designed to accurately measure inclination angles in two directions X and Y in the range of ±80º. The resolved angles can be then sent to the SAE J1939 fieldbus, RS232 port or output as voltages using three available inclinometer signal voltage outputs. Due to a powerful microcontroller, the inclinometer can perform pre-processing of the angular information according to the users’ needs.

The controller belongs to a family of Axiomatic smart controllers with programmable internal architecture. This provides users with flexibility, allowing them to build their own custom controller with a required functionality from a set of predefined internal functional blocks using the PC-based Axiomatic Electronic Assistant® software tool. Application programming is performed through the CAN interface, without disconnecting the controller from the user’s system.


  • Industrial Automation
  • Cranes
  • Hoists
  • Utility Vehicles
  • Off-highway, Ag, and Forestry Equipments
Technical Specifications:Inclinometer with CAN (SAE J1939)
Order Codes:P/N: AX060201 - 1 or 2 axis, CAN SAE J1939
P/N: AX060202 - 1 or 2 axis, 3 Analog Outputs (X, Y, Vertical Mount)
P/N: AX060203 - 1 or 2 axis, 1 RS-232
Measurement Range:User configurable
Single Axis: -180º…180º (0…360º)
Dual Axis: -80º…80º
Outputs:AX060201: pitch and roll angles on the CAN network according to SAE J1939/71
AX060202: 3 0-5VDC Signals
AX060203: RS-232 Signal
(12VDC, 24VDC nominal)
Communications:SAE J1939 (For CANopen® versions, click here.)
Control Logic:User programmable functionality using Electronic Assistant®
Packaging:Cast Aluminum enclosure, Gasket, Lid, Encapsulated
2 5-pin M12 integral connectors
2.90 x 5.35 x 1.42 inches
73.66 x 135.99 x 36.16 mm
(L x W x H)
Protection Rating:IP67
Operating Conditions:-40 to +85°C
PDF Datasheet: Click icon for PDF datasheet.

This is a unique website which will require a more modern browser to work!

Please upgrade today!