Description:
The converter powers devices at 120VDC up to 2 Amps (240 Watts). It accepts 24V DC nominal power input. The unit is packaged for on-engine environments with an IP67 rated enclosure and watertight connector. It is specifically designed with active ripple suppression to handle highly inductive loads such as fuel injectors.
Step Up Converter Applications:
DC-DC Converter Product Line

Websites to visit!
HydraForce Inc.
Advanced Surge Suppressors
Mobile Electronics
|
| Technical Specifications |
24VDC-120VDC Converter P/N: AX080100
 Refer to datasheet. |
| Input: |
24V DC nominal
16...32VDC
Undervoltage Shutdown 16V
Overvoltage Shutdown 33V |
| Output: |
120V DC regulated, 2A continuous (240 Watts)
The device is current limited to 3A. |
| Protection: |
Surge |
Average
Efficiency: |
93% |
| Logic: |
Below 28V input, the output follows the input using a 4.3 x ratio.
At 28V input and above, the output is regulated to 120V DC. |
| Rating: |
IP67 |
| Packaging and Dimensions: |
Extruded Aluminum housing with stainless steel end plates
5.12 x 5.50 x 2.39 inches 130.0 x 139.7 x 60.7 (L x W x H) |
| Electrical Connections: |
Deutsch IPD P/N : DTP04-4P-L012
A mating wire harness is available and includes 2 meters (6.5 ft.) of unterminated 12 AWG wires as well as the Deutsch IPD mating connector assembly (Deutsch P/N: DTP06-4S, WP4S and four contact sockets 0462-203-12141). |
| Operating Temperature: |
-40 to 70 degrees C (-40 to 158 degrees F) |
| Order codes: |
Converter: AX080100
Mating wire harness:
WH-DTP06-4S-S-2M |
Last Updated: August 23,2006
|