Need a quote? Contact us. +1 905 602 9270 or or

AX030140: CAN Controller

The 3 Encoder, 7 Signal Input Module accepts up to 3 encoders; 1 analog or digital type signal inputs (0-5V, 0-10V, 0-20 mA or 4-20 mA, Digital, PWM, Frequency/RPM or Counter); 4 digital type signal inputs (Digital, PWM, Frequency/RPM) and 2 Digital inputs. Rugged IP67 rated packaging in addition to a wide-ranging power supply input section for 12V, 24V or 48Vdc power suits applications in the harsh environment of mobile equipment with on-board battery power.


The controller is designed to meet the rugged demands of construction equipment, power generator sets, and industrial machine control applications.

Analog I/O, Distributed Controls

Toggle content goes here, click edit button to change this text.

Technical Specifications:3 Encoder, 1 Universal Signal, 6 Digital/PWM/Hz Inputs
CAN (SAE J1939) or CANopen
with Electronic Assistant
Order Code:P/N: AX030140 (SAE J1939, 250 kbps)
P/N: AX030140-01 (SAE J1939, 500 kbps)
P/N: AX030140-02 (SAE J1939, 1 Mbps)
P/N: AX030141 (CANopen)
Power:12, 24, or 48Vdc nominal operating voltage (8...60 Vdc power supply range for voltage transients)
Inputs:1 user selectable input
 Analog 12-bit (0-5V, 0-10V, 0-20 mA, 4-20 mA)
 PWM 12-bit (low or high frequency) – auto detect 0.5 to 50 kHz, 0-100%
 Frequency/RPM – auto detect 0.5 to 50 kHz, 0-100%
 Counter input 16-bit
 Digital (active high/active low) [ON when input > 1.5V]
Control logic:The software was designed to provide flexibility to the user with respect to
messages sent from the module (ECU) over the CAN bus, by providing:
 Configurable ECU Instance in the NAME (to allow multiple ECU’s on the
same network)
 Configurable Input Parameters
 Configurable PGN and Data Parameters
 Configurable Diagnostic Messaging Parameters, as required
 Diagnostic Log, maintained in non-volatile memory
Communications:400 Vrms
Communications 1 CAN port (2.0B, SAE J1939)
Model AX030140 – 250 kbps baud rate
Model AX030140-01 – 500 kbps baud rate
Model AX030140-02 – 1 Mbps baud rate
A CANopen® model is available, ordering part number AX030141.
Electrical Connections: TE Deutsch DTM series 24 pin receptacle (DTM13-12PA-12PB-R008)
Mating plug: TE Deutsch DTM06-12SA and DTM06-12SB
with 2 wedgelocks (WM12S) and 24 contacts (0462-201-20141).
20 AWG wire is recommended for use with contacts 0462-201-20141.
Enclosure:High Temperature Nylon housing – TE Deutsch PCB Enclosure (EEC-325X4B)
4.63 x 5.25 x 1.41 inches 117.60 x 133.50 x 35.90 mm
(W x L x H excluding mating plugs)
Protection Rating:IP67, Unit is conformal coated in the housing
Protection:Surge protection, reverse polarity protection
Compliance:CE marking
Operating Conditions:-40 to 85°C (-40 to 185°F)
PDF Datasheet: Click icon for PDF datasheet.

This is a unique website which will require a more modern browser to work!

Please upgrade today!