Need a quote? Contact us. +1 905 602 9270 or sales@axiomatic.com or salesfinland@axiomatic.com

AX030141: 3 Encoder, 7 Signal Inputs CAN Controller

The 3 Encoder, 7 Signal Input Module accepts up to 3 encoders; 1 analog or digital type signal inputs (0-5V, 0-10V, 0-20 mA or 4-20 mA, Digital, PWM, Frequency/RPM or Counter); 4 digital type signal inputs (Digital, PWM, Frequency/RPM) and 2 Digital inputs. The modules can be connected to a variety of analog machine sensors or levers, PLC’s, switches, PWM signals, etc. It interfaces with the machine’s CAN network (CANopen®). Standard embedded software is provided. Rugged IP67 rated packaging in addition to a wide-ranging power supply input section for 12V, 24V or 48Vdc power suits applications in the harsh environment of mobile equipment with on-board battery power. All setpoints are user configurable.

Applications


The controller is designed to meet the rugged demands of construction equipment, power generator sets, and industrial machine control applications

Technical Specifications:3 Encoder, 1 Universal Signal, 6 Digital/PWM/Hz Inputs
CANopen®
Order Code:P/N: AX030141 (CANopen)
Power:12, 24 or 48Vdc nominal operating voltage
8…60 Vdc power supply range for voltage transients
Inputs:1 user selectable input
 Analog 12-bit (0-5V, 0-10V, 0-20 mA, 4-20 mA)
 PWM 12-bit (low or high frequency) – auto detect 0.5 to 50 kHz, 0-100%
 Frequency/RPM – auto detect 0.5 to 50 kHz, 0-100%
 Counter input 16-bit
 Digital (active high/active low) [ON when input > 1.5V]
Control logic:Refer to the User Manual UMAX030141 for details.
The AX030141 can be upgraded with new application firmware over the CAN bus
using the Electronic Assistant
Communications:1 CAN port (CANopen®)
Electrical Connections: TE Deutsch DTM series 24 pin receptacle (DTM13-12PA-12PB-R008)
Mating plug: TE Deutsch DTM06-12SA and DTM06-12SB
with 2 wedgelocks (WM12S) and 24 contacts (0462-201-20141).
20 AWG wire is recommended for use with contacts 0462-201-20141
Enclosure:High Temperature Nylon housing – TE Deutsch PCB Enclosure (EEC-325X4B)
4.63 x 5.25 x 1.41 inches 117.60 x 133.50 x 35.90 mm
(W x L x H excluding mating plugs)
Protection Rating:IP67, Unit is conformal coated in the housing
Operating Conditions:-40 to 85°C (-40 to 185°F)
PDF Datasheet: Click icon for PDF datasheet.

This is a unique website which will require a more modern browser to work!

Please upgrade today!