The 18 Digital Signal Input Module accepts up to 10 digital type inputs (active high/active low, PWM signal, Frequency or counter). Eight additional digital inputs are user selectable as Active High or Active Low. The electroni control can be connected to a variety of machine switches, sensors, PWM signals, etc. It interfaces with the machine’s CAN network (SAE J1939). Standard embedded software is provided. Rugged packaging in addition to a wide-ranging power supply input section for 12V or 24Vdc power suits applications in the harsh environment of mobile equipment with on-board battery power. All setpoints are user configurable using the Electronic Assistant®.
The device was developed with Simulink®.
Applications
Engine controls for power generation, co-generation, stationary power
Engine controls for commercial vehicles, off-highway equipment, etc.
10 digital inputs are user selectable from the following.
o Active High/Active Low
o PWM signal from sensors or diesel engine ECM’s
o Frequency (Hz or RPM)
o Counter
8 digital inputs are user selectable as Active High/Active Low
Control logic:
Standard embedded software
(Application-specific logic is available on request.)
User programmable functionality using Electronic Assistant®
Communications:
1 CAN port (2.0B, SAE J1939)
250 kbps: AX030310
500 kbps: AX030310-01
1 Mbps: AX030310-02
A CANopen® model is available (PN AX030311).
Enclosure:
High Temperature Nylon housing - Deutsch IPD PCB Enclosure (EEC-325X4B)
4.62 x 5.24 x 1.43 inches
117.42 x 133.09 x 36.36 mm
(W x L x H excluding mating plugs)
Aluminum extrusion with stainless steel end plates.
5.86 x 5.60 x 2.87 inches
149.00 x 142.24 x 73.00 mm
(W x L x H excluding mating connectors)
Protection Rating:
IP67
Operating Conditions:
-40 to 85°C (-40 to 185°F)
Compliance:
CE mark
PDF Datasheet:
Click icon for PDF datasheet.
This is a unique website which will require a more modern browser to work!