The CAN-PWM Signal Converter features PWM Signal output to communicate with a control. Output is user configurable as Frequency or digital. It has 1 isolated CAN port (CANopen®) to read engine speed messages or other engine information. The Signal Converter meets the surge requirements of SAE J1445 and is designed for EMC compliance. It is IP67 rated.
P/N: AX130701 (CAN-PWM Signal Converter, CANopen®)
Power:
12 V or 24 Vdc nominal
Output:
PWM Signal, Frequency Signal or Mixed Output
1 Hz to 20 kHz
0-100% D.C. (User configurable)
5V or 12V amplitude
Push pull output
Maximum load is 50 mA (at 5V) or 30 mA (at 12V).
Over-current protection (50 mA)
Digital Level
Digital On/Off
5V or 12V Amplitude
Maximum load is 50 mA (at 5V) or 30 mA (at 12V)
Control Logic:
User programmable functionality using SDO object access, per CiA DS-301
User Interface:
EDS File
Communications:
1 CAN (CANopen®
Electrical Connections:
6 pin TE Deutsch connector P/N: DT04-6P
Enclosure:
Plastic Enclosure, Nylon 6-6 with 30% glass fill
Integral Deutsch IPD connector
77 x 61.3 x 33.4 mm
3.03 x 2.413 x 1.314 in (LX W X H)
Protection Rating:
IP67
Operating Conditions:
-40 to 85°C (-40 to 185°F)
PDF Datasheet:
Click icon for PDF datasheet.
This is a unique website which will require a more modern browser to work!