Need a quote? Contact us. +1 905 602 9270 or sales@axiomatic.com or salesfinland@axiomatic.com

AX130750: CAN to 2 Analog/Digital Signals and 1 Relay Output Converter

the CAN to Converter featured 2 Analog/Digital signal outputs configurable as: 0-5V; 0-10V; 4-20 mA; Frequency or PWM Signal, 1 Relay output, 1 isolated CANopen® port (SAE J1939 model available). It is Operational 9…36 Vdc (12 Vdc or 24 Vdc). Meets the surge requirements of SAE J1445, and designed for EMC compliance. Configure with Axiomatic Electronic Assistant

Applications


  • Throttle controls for marine engine applications
  • Servo applications
Technical Specifications:CAN to 2 Analog/Digital Signals and 1 Relay Output Converter
SAE J1939
Order Code:P/N: AX130750 (CAN to A/D and Relay Outputs Converter, 250 kbps Isolated SAE J1939)
P/N: AX130750-01 (CAN to A/D and Relay Outputs Converter, 500 kbps SAE J1939)
P/N: AX130750-02 (CAN to A/D and Relay Outputs Converter, 1 Mbps SAE J1939)
Power:12 V or 24 Vdc nominal; 9…36 Vdc
The minimum allowable supply voltage for the power pin is 7 Vdc.
Control logic:Pre-programmed with standard logic. Refer to the user manual.
Communications:1 CAN (SAE J1939)
AX130750: 250 kbps baud rate
AX130750-01: 500 kbps baud rate
AX130750-02: 1 Mbps baud rate
Electrical Connections: Integral TE Deutsch 12 pin receptacle (P/N: DTM13-12PA-R008)
Enclosure:Molded Enclosure, integral connector
Nylon 6/6, 30% glass
Ultrasonically welded
3.54 x 2.75 x 1.31 inches (90.09 x 70.00 x 33.35 mm)
L x W x H including integral connector
Protection Rating:IP67
Operating Conditions:-40 to 85°C (-40 to 185°F)
PDF Datasheet: Click icon for PDF datasheet.

This is a unique website which will require a more modern browser to work!

Please upgrade today!