Need a quote? Contact us. +1 905 602 9270 or or

AX181001: TC/Analog Inputs to CAN Controller

The TC/Analog Inputs to CAN Controller receives inputs from engine coolant, fuel and differential pressure sensors, engine temperature sensors, thermistors as well as thermocouples and is networked to a CAN based control system. Seven +5V references (10 mA) are provided to power the sensors. The 2 CANopen® ports are isolated from signal inputs and thermocouple inputs.

Engine Management Controls, Temperature Monitoring

  • Power gen set engine control systems
  • Oil and gas equipment automation
  • Marine engine applications
  • Off-highway machine automation
Technical Specifications:TC/Analog Inputs to CAN Controller
4 Thermocouple, 7 Analog & 3 Signal Inputs
12 Vdc, 24 Vdc, 48 Vdc
2 CANopen®
Order Code:P/N: AX181001 (CANopen)
P/N: AX181000 (SAEJ9139)
Power:12 Vdc, 24 Vdc or 48 Vdc nominal (9…60 Vdc power supply range)
Control logic:Standard embedded software is provided
Communications:2 Isolated CANopen® ports
300 Vrms
Electrical Connections: 48 pin Deutsch IPD connector P/N: DT13-48PABCD-R015
Mates with: Deutsch IPD P/N’s
DT06-12SA Plug, DT 12 Way A Key
DT06-12SB Plug, DT 12 Way B Key
DT06-12SC Plug, DT 12 Way C Key
DT06-12SD Plug, DT 12 Way D Key
Enclosure:High Temperature Nylon housing, Deutsch IPD P/N: EEC-5X650B
4.03 x 4.25 x 1.68 inches 102.44 x 107.96 x 42.67 mm
(L x W x H including integral connector)
Protection Rating:IP67
Operating Conditions:-40 to 85°C (-40 to 185°F)
PDF Datasheet: Click icon for PDF datasheet.

This is a unique website which will require a more modern browser to work!

Please upgrade today!