Need a quote? Contact us. +1 905 602 9270 or or

AX020510: 6 Input, 5 Output Valve Controller with SAE J1939

The valve controller provides precise, repeatable control of 5 proportional or on/off solenoids over a SAE J1939 network. PWM signal inputs or analog voltage or current inputs are accepted for interface to a PLC, Engine Control Module or command potentiometers. Multiple switched inputs are provided to suit a range of applications. Each can be configured to measure the input value, and send the data to a SAE J1939 CAN network. In addition, any output on the controller could be configured to use any of the on board inputs as either a control signal or an enable signal, instead of taking the control information from the CAN bus. Diagnostics messages are provided over the CAN network for the status of inputs or outputs. Settings are user configurable via a Windows-based Electronic Assistant® configuration tool interfacing to the controller via an USB-CAN device to suit a wide variety of applications.

The device was developed with Simulink®.

Technical Specifications:6 Input, 5 Output Valve Controller with SAE J1939
Order Codes:P/N: AX020510, AX020510-01, AX020510-02
Power:12 or 24Vdc nominal (8…36 Vdc power supply range)
NB. The maximum total current draw permitted on the power supply input pins is 7.5 Amps @ 24Vdc, at one time.
Inputs:Up to 6 inputs are selectable by the user from the following.
o 4 Analog/Digital/PWM Inputs
o 2 Frequency/Digital Inputs
All inputs, except for frequency and counter, are sampled every 10ms.
Outputs:5 Independent outputs for hydraulic valves (0…2.5A) are user selectable from the following.
o Proportional Current
o Hotshot Digital
o PWM Duty Cycle
o Proportional Voltage
o On/Off Digital
Control Logic:Standard embedded control logic is provided.
User programmable functionality using Electronic Assistant®
CAN Interface:1 CAN port (SAE J1939)
250 kbps: AX020510
500 kbps: AX020510-01
1 Mbps: AX020510-02
Enclosure:High Temperature Nylon housing, Deutsch IPD PCB Enclosure (EEC-325X4B)
4.62 x 5.24 x 1.43 inches
117.42 x 133.09 x 36.36 mm (W x L x H excluding mating plug)
Operating Conditions-40 to 85°C (-40 to 185°F)
PDF Datasheet: Click icon for PDF datasheet.

This is a unique website which will require a more modern browser to work!

Please upgrade today!