Need a quote? Contact us. +1 905 602 9270 or or


The valve controller provides precise, repeatable control of 5 proportional or on/off solenoids over a SAE J1939 network. PWM signal, frequency/RPM or digital inputs as well as analog voltage, current and resistive inputs are accepted for interface to a PLC, Engine Control Module or command potentiometers.


The controller is designed for harsh operating environments. Typical applications include: industrial; offhighway (mobile); and marine applications for the control of hydraulic proportional poppet or spool valve

Technical Specifications:7 INPUTS, 5 OUTPUTS VALVE CONTROLLER
CAN (SAE J1939)
with Electronic Assistant
Order Code:P/N: AX021910 (250 kBit/s J1939/11, J1939/15)
P/N: AX021910-01 (500 kBit/s J1939/14. New standard)
P/N: AX021910-02 (1Mbit/s Non-standard)
P/N: AX021911 CANopen®
Power:12 or 24Vdc nominal (8…36 Vdc power supply range)
NB. The maximum total current draw permitted on the power supply input pins is
7.5 Amps @ 24Vdc, at one time
Inputs:Up to 7 inputs are selectable by the user from the following
Outputs:Five independent outputs (0…2.5A) are user selectable
Control logic:Standard embedded software is provided and is configurable using the Electronic
Assistant (EA)
Communications:1 CAN port (SAE J1939)
Electrical Connections:Deutsch DTM series 24 pin receptacle (DTM13-12PA-12PB-R008)
Refer to Table 4.0 in pdf datasheet for more detail
Enclosure:High Temperature Nylon housing, Deutsch IPD PCB Enclosure (EEC-325X4B)
4.677 x 5.254 x 1.417 inches
118.80 x 133.45 x 35.99 mm (W x L x H excluding mating plug)
Protection Rating:IP67; Unit is conformal coated within the housing
Operating Conditions:-40 to 85°C (-40 to 185°F)
PDF Datasheet: Click icon for PDF datasheet

This is a unique website which will require a more modern browser to work!

Please upgrade today!