Need a quote? Contact us. +1 905 602 9270 or or

AX023100: Single Plug-In Valve Controller

The Single Plug-In Hydraulic Valve Controller is a user programmable distributed electronic control. The machine designer can configure the electronic control for their agricultural equipment or construction machine application. It drives one proportional hydraulic solenoid in response to a single command input signal from a joystick, potentiometer or other input. The control is designed to be mounted directly on the hydraulic valve with molded Deutsch IPD connectors and provides distributed control on the mobile machine. It is ruggedly packaged with IP67 protection.

A dual output plug-in valve controller with CAN bus is also available.


  • Agricultural equipment, off-highway (mobile) equipment component for the control of hydraulic valves
Technical Specifications:Single Plug-In Valve Controller
Order Codes:P/N: AX023100
Input:1 Signal Input
(0.5-4.5VDC, 0-5VDC, 4-20 mA, or PWM)
Output:High Side (sourcing)
Drives 1 Proportional Hydraulic Valve
(up to 2.0A each)

Output is user programmable for minimum current, maximum current, ramps, and superimposed dither.
Power:12V or 24Vdc nominal
Control Logic:Standard embedded software with user programmable setpoints and control profiles (Refer to datasheet.)
User Configurability:Axiomatic Local Controller Single EWRITE GUI

Configuration Cable P/N: AX070120
Enclosure:Molded Enclosure, IP67
Polyester with 15% Glass and Silicone Seal
Integral connectors (Deutsch IPD P/N: DT06-2S and DT04-6P)
3.04 x 1.44 x 1.53 inches
77.1 x 36.6 x 38.8 mm
L x W x H including integral connector
PDF Datasheet: Click icon for PDF datasheet.

This is a unique website which will require a more modern browser to work!

Please upgrade today!