AX100100: 25A DC Motor Controller
Technical Specifications: | 25A DC Motor Controller |
Order Codes: | P/N: AX100100 |
Power: | 12 or 24VDC nominal; 9…36 VDC |
Inputs: | 2 signal inputs (0-5V, 0-10V, 0-20 mA, 4-20 mA or digital) |
Output to Motor: | H-bridge
50A @ 24VDC nominal for 2 minutes at room temperature
37.5 @ 24VDC nominal for 30 minutes at room temperature
25A @ 24VDC nominal for 1 hour minimum |
Current Outputs: | 2 proportional (0…2A) or hotshot digital (2A)
Ramp and dither setpoints are configurable. |
Digital Outputs: | 2 on/off (3A)
The user can select the following options for output using the EA.
Digital control responses
• Disabled
• Blinking
• Normal
• Inverse
• Latching
Enable control responses
• Dout ON if Control or Enable ON
• Dout ON if Control and Enable ON
• Dout ON when Motor Running
• Dout ON when Motor Stopped
• Dout ON if Pout1 or Pout2 ON
• Dout ON if Pout1 and Pout2 ON |
Signal Output: | 1 0-5V signal provides feedback of the duty cycle being applied to the motor or of another selected variable. |
Control logic: | Standard embedded control logic is provided.
User programmable functionality using Electronic Assistant® |
CAN Interface: | 1 CAN port (SAE J1939) |
Packaging: | Encapsulated in an aluminum extrusion with stainless steel end plates
5.50 x 6.93 x 2.38 inches
139.7 x 176.02 x 60.6 mm
(W x L x H including connectors, excluding mating connectors) |
Protection Rating: | IP67 |
Operating Conditions: | -40 to 85ºC (-40 to 185ºF) |
PDF Datasheet: | Click icon for PDF datasheet. |