The bidirectional converter/charger is suitable for application on battery based systems for use on marine or land-based equipment. The battery charging system may be connected to renewables such as solar panels. The AX082600 is controllable over the CAN bus. Direction of charge, target charging voltage, charging current and nominal battery voltage are configurable over the CAN bus. It is suitable for integration into advanced power and battery management systems.
Applications
- Battery based systems
- Marine based-equipment
- Land based-equipment
| Technical Specifications: | 48Vdc 24Vdc or 12Vdc SAE J1939 CAN |
| Order Code: | P/N:AX082600 (Bidirectional Converter-Charger) P/N:AX082600K (Converter and mating wire harnesses as a KIT) P/N: AX070502 (Electronic Assistant) |
| Power: | 48 Vdc nominal (BAT 1) 24Vdc or 12Vdc nominal (BAT 2) |
| Control logic: | Settings are user configurable. Standard embedded control logic is provided. The AX082600 is controllable over the CAN bus. Direction of charge, target charging voltage, charging current and nominal battery voltage are configurable over CAN bus |
| Communications: | 1 CAN port (ISO 11898 compatible) Termination resistor is not installed. SAE J1939 stack; Baud Rate: 250 bit/sec. |
| Electrical Connections: | Two 4-pin plugs, TE Deutsch |
| Enclosure: | Anodized Aluminum enclosure with gaskets Encapsulated 7.033 x 4.764 x 2.479 in 178.64 x 121.00 x 62.96 mm (L X W X H) |
| Protection Rating: | IP67 |
| Operating Conditions: | -40 to 85°C (-40 to 185°F) |
| PDF Datasheet: |  Click icon for PDF datasheet. |