AX14032X: 2 Isolated CAN bus ports (SAE J1939, CANopen®) 1 Non-isolated RS422 or RS-485 port (Modbus RTU/J1587) Protocol Converter
This protocol converter acts as a gateway or interface between CAN buses with different baud rates and protocols (SAE J1939-SAE J1939
or SAE J1939-CANopen®). It also facilitates fast data exchange between a CAN network (SAE J1939 or CANopen®) and a RS-422 bus (SAE J1587 or Modbus RTU). This IP67 rated unit has a fully sealed enclosure that can withstand harsh environments.
AX1403X0 supports RS-485 if TX+ and RX+ (pins 10 & 4) are connected together (RS485 D+) and then TX- and RX- (pins 9 & 8) are connected together (RS485 D-).
Molded Enclosure, integral connector
Nylon 6/6, 30% glass, ultrasonically welded
3.54 x 2.75 x 1.31 inches (90.09 x 70.00 x 33.35 mm)
L x W x H including integral connector
Protection Rating:
IP67
Electrical connections:
12 pin TE Deutsch style connector (P/N: DT15-12PA)