Need a quote? Contact us. +1 905 602 9270 or or

AX060810/AX060811: Inclinometer with DT15-4P Connector

The inclinometer is designed to accurately measure inclination angles in three directions X, Y and Z in the range of ±180º. If vertically installed, it can measure an inclination angle in one sensing direction in the 0-360º range.

The angles are measured by a three-axis MEMS sensor, which senses acceleration caused by the gravity force in three orthogonal directions. The output signals from the MEMS sensor are normalized and processed by a microcontroller. The resolved angles can be then sent to the SAE J1939 fieldbus.

All application programming is performed through SAE J1939 CAN interface by the PC-based Axiomatic Electronic Assistant software.

The inclinometer is IP67 rated and is packaged in a cast Aluminum housing with 1 TE Deutsch p/n DT15-4P connector.


  • Industrial Automation, Cranes, Hoists, Utility Vehicles, Off-highway, Ag, and Forestry Equipment
Technical Specifications:Inclinometer with DT15-4P Connector (SAE J1939)
Order Codes:P/N: AX060810 – Inclinometer, SAE J1939, 1 TE Deutsch DT15-4P Connector
P/N: AX060811 – Inclinometer, SAE J1939, Internal CAN Termination, 1 DT15-4P Connector
Measurement Range:User configurable
Three Axes: -180º…180º (0…360º)
Outputs:Pitch and roll angles on the CAN network
Operating Voltage:12V, 24V nominal
Communications:1 CAN port, SAE J1939
CANopen models are available (P/N: AX060450 or AX060451).
User Interface:User programmable functionality using Axiomatic Electronic Assistant
Enclosure:Cast Aluminum enclosure with gasket, Encapsulated
1 TE Deutsch p/n DT15-4P connector
3.34 x 3.14 x 2.18 inches
84.8 x 79.8 x 55.5 mm (L x W x H)
Protection Rating:IP67
Operating Conditions:-40 to 85°C (-40 to 185°F)
PDF Datasheet: Click icon for PDF datasheet.

This is a unique website which will require a more modern browser to work!

Please upgrade today!