Need a quote? Contact us. +1 905 602 9270 or or

IC-DR-xx: Analog Signal Converter

The Isolated Current-Current Converter accepts a 24VDC power supply (nominal). A bipolar 0-200 mA input signal is converted to a 4-20 mA current output. Span and zero is user adjustable. Diagnostic LEDs indicate power and operational status. The output LED is on when the load, input signal and power supply are connected. The LED flashes when the load is disconnected. The load can be floating or grounded. The unit is potted (prototype is conformal coated) and available in a DIN rail mount housing.


  • Mobile Equipment
  • Industrial Hydraulics
Technical Specifications:Analog Signal Converter
Order Codes:P/N: IC-DR-13
P/N: IC-DR-16
P/N: IC-DR-19
P/N: IC-DR-23
Input:IC-DR-13: 4-20 mA
IC-DR-16: +/-10VDC
IC-DR-19: +5 to –5VDC
IC-DR-23: 0-10VDC
Output Settings:IC-DR-13, IC-DR-16, IC-DR-19: +/-10 mA up to +/-310 mA

IC-DR-23: -200 mA to +200 mA
Power Supply:24VDC nominal (16-32VDC operating range)
Transient protection is provided up to 36V.
Short Circuit Protection:All ways (input, output and power supply)
Reverse Polarity
Enclosure:DR12, 16 Amp max. current rating, Polycarbonate
(75 x 98.5 x 22.5 mm or 2.95 x 3.87 x 0.88 inches)
DIN rail mount for high profile DIN rail (35 mm)
Protection:PCB conformal coated
IP40 rated housing, Terminals rated at IP20
Electrical Connection:Screw terminals accept 14-24 AWG wire
Operating Conditions:-40 to 85 ° C (-40 to 185 °F)
PDF Datasheet: Click icon for PDF datasheet.

This is a unique website which will require a more modern browser to work!

Please upgrade today!