The wake-on-charge module manages the vehicle controller power mode for wake and sleep. It has a charger status indication when the vehicle is plugged in (on charge).
Applications
- Electric Vehicles
| Technical Specifications: | Wake-On-Charge Module, CAN 2.0B |
| Order Codes: | P/N: AX130600 (Wake-On-Charge Module) Accessories: P/N: AX070112 (comprised of DT06-8SA, W8S, 7 pcs. 0462-201-16141, 1 pc. 114017) |
| Power Supply: | 12Vdc nominal (6...16Vdc power supply range) |
| Input: | Accepts 1 Control Pilot Input Signal Detects when a Control Pilot signal is present and triggers the module to wake up within 100 ms. Reads the PWM duty cycle of the Control Pilot Signal input (3-95% D.C.) from an EVSE With a resolution of 0.5% and accuracy of 1% Impedance compatible with SAE J1772 Vehicle State B and C |
| Output: | 200 mA @12VDC (with a drop of 1VDC permitted) High side driver |
| LED Output: | 2 LED outputs |
| Control Logic: | Module Wake/Sleep VCU Wake/Sleep Delayed Module Sleep/VCU Re-wake Control of power mode LED Control (separately) Status Feedback over CAN of all inputs and outputs |
| CAN: | 1 CAN 2.0 B port; 500 kbps baud rate; 11-bit ID |
| Enclosure: | Cast Aluminum housing with mounting holes 4.62 x 1.91 x 1.76 inches (117.30 x 48.56 x 44.73 mm) L x W x H including integral connector |
| Protection Rating: | IP67 |
| Operating Conditions: | -40 to 50 °C (-40 to 122 °F) |
| PDF Datasheet: |  Click icon for PDF datasheet. |