The dual channel universal signal converter accepts two voltage, current, resistive, frequency, RPM, PWM or digital control signal inputs and converts them into two signal outputs (analog voltage, analog current or digital signal). The control can be networked to a SAE J1939 networked engine control system.
2 Analog, Resistive, Digital, Frequency (RPM) or PWM Signal Inputs
2 Analog, Digital, Frequency or PWM Signal Outputs
+5V reference (50 mA)
Isolated CAN (SAE J1939)
Developed with Simulink®
with Electronic Assistant
12 Vdc or 24 Vdc nominal
9…36 Vdc power supply range
Shutdown voltage is 8.0 Vdc
Control logic:
Standard embedded software is provided.
(Application-specific control logic or a set point file is available on request.)
Communications:
1 Isolated CAN port (SAE J1939) (CANopen® on request)
Models:
AX130520 – 250 kbps baud rate
AX130520-01 – 500 kbps baud rate
AX130520-02 – 1 Mbps baud rate
Electrical Connections:
TE Deutsch DTM series 12 pin receptacle (P/N: DTM13-12PA-R008)
20 AWG wire is recommended for use with contacts 0462-201-20141.
Enclosure:
High Temperature Nylon housing – TE Deutsch PCB Enclosure (EEC-325X4B)
4.64 x 5.232 x 1.41 inches 117.90 x 132.90 x 35.80 mm
(W x L x H excluding mating plugs)
Protection Rating:
IP67
Operating Conditions:
-40 to 85°C (-40 to 185°F)
PDF Datasheet:
Click icon for PDF datasheet.
This is a unique website which will require a more modern browser to work!