IIC-DR-22: Isolated Current Converter
The Isolated Current Converter accepts a 24Vdc power supply (nominal). A 0-200 mA input signal is converted to a 4-20 mA current output. Span and zero are user adjustable. Diagnostic LEDs indicate power and operational status. The output LED is on when the load, input signal and power supply are connected. The LED flashes when the load is disconnected. The load can be floating or grounded. The unit is available in a DIN rail mount housing.
Applications
- As part of a load management strategy for a marine propulsion system, the unit converts a 0-200 mA load signal from a diesel engine control computer to a 4-20 mA signal for a variable pitch propeller control system.
Technical Specifications: | Isolated Current Converter |
Order Codes: | P/N: IIC-DR-22 |
Input Specifications |
Current Input: | 0-200 mA |
Isolation: | Isolated from output and power supply. |
Output Specifications |
Response Time: | 10 mSec. |
Isolation: | Isolated from input and power supply. |
Current Output: | 4-20 mA |
General Specifications |
Power Supply: | 24VDC nominal (15-45VDC operating range)
Transient protection is provided. |
Adjustments: | Multi-turn trim pots (10 turns).
Zero
CW = increasing
Apply 0 mA input current and adjust the Zero trimpot to 4 mA output
current.
Span
CW = increasing
Apply 200 mA input current and adjust the Span trimpot to 20 mA current
output. |
Protection: | PCB conformal coated
IP40 rated housing, Terminals rated at IP20 |
Packaging: | DR12, Polycarbonate
(75 x 98.5 x 22.5 mm or 2.95 x 3.88 x 0.89 inches)
DIN rail mount for high profile DIN rail (35 mm) |
Electrical Connection: | Screw terminals accept 14-24 AWG wire |
Operating Conditions: | -40 to 85 ° C (-40 to 185 °F), 0-95% relative humidity |
PDF Datasheet: | Click icon for PDF datasheet. |