The Isolated PWM to Voltage or Current Signal Converter provides a compact solution for converting digital pulse width modulated (PWM) signal into a current or voltage signal. Current to PWM and Voltage to PWM signal converters are also available.
Applications
- Power generation
- Speed control of a diesel engine
- Mobile equipment
- Industrial hydraulics
- Industrial control panels
- Engine control panels
| Technical Specifications: | PWM to Current (or Voltage) Signal Converter |
| Order Codes: | P/N: AX130200 (PWM to 0-20 mA output) P/N: AX130201 (PWM to 4-20 mA output) P/N: AX130202 (PWM to 0-5V output) P/N: AX130203 (PWM to 0-10V output) |
| Input Specifications | |
| PWM Input: | PWM 50 Hz to 50 kHz 0 to 100% D.C. |
| Input Voltage: | Low <1.5V, High >3.5V (50V max.), TTL and CMOS compatible |
| Input Impedance: | 200 kOhms |
| Output Specifications | |
| Response Time: | 100 mSec. |
| Voltage Output: | Fully isolated Active output 0-5 VDC (AX130202) 0-10 VDC (AX130203) |
| Current Output: | Fully isolated 0-20 mA (AX130200) 4-20 mA (AX130201) |
| Output Impedance: | 1 Ohm, Transient protection, Short circuit protection |
| Compliance Voltage: | 8.8VDC |
| Adjustments: | Span and Offset (Zero) are factory set. |
| Protection: | IP20 |
| Power Supply: | 12VDC or 24VDC nominal (8-36VDC range) Transient and Overvoltage protection provided. |
| Packaging: | PCB is conformal coated Housing (Wieland WEG8), Polyamide 6.6 plastic, UL94V-0 DIN rail mount, 35 mm 2.38 x 3.56 x 1.12 inches 60.6 x 90.5 x 28.5 mm (W x H x D) excluding DIN rail |
| Electrical Connection: | #12 to #22 AWG screw terminals |
| Operating Conditions: | -40 to 85 ° C (-40 to 185 °F), 0-95% relative humidity |
| PDF Datasheet: |  Click icon for PDF datasheet. |