No posts to display

Axiomatic Technologies Corporation has developed a range of isolated power converters that are suited for use under harsh conditions.

The 18W DC/DC isolated power converters in the AX0823XX series come in three models: 9-36Vdc to 12 Vdc, 12 Vdc to 12 Vdc, and 24V/24V. All units have a typical efficiency rating of 87% and are operational between -40 to 70 °C.

Protections on these IP67 rated units include reverse battery protection, over and under-voltage protection, short circuit and overcurrent protection, and thermal protection for overtemperature. It is also protected against 205Vdc load dump.

This power converter is suitable for applications on vehicles, such as off-highway equipment, fire trucks, and municipal vehicles.

Contact: Amanda Wilkins, Chief Marketing Officer
TEL: +1 905 602 9270 x224
[email protected]

A PDF version of this press release may be downloaded from: https://www.axiomatic.com/wp-content/uploads/pr-ax0823XX-july2022.pdf

Axiomatic Technologies Corporation has developed a CAN controller with 1 Resistive Output.

The AX030570 unit is a system interfacing module that converts a CAN signal into a resistive signal. It allows analog systems to be interfaced to CAN-based engine or machine control units. A typical application would be emulating an analog joystick or potentiometer.

This unit features one resistive output and accepts 12 or 24V input power. It communicates through SAE J1939 with auto baud-rate detection. Its IP-67rated rugged enclosure and conformal coated PCB allows for use in the harshest of environments. A CANopen® model is also available upon request.

Contact: Amanda Wilkins, Chief Marketing Officer
TEL: +1 905 602 9270 x224
[email protected]

A PDF version of this press release may be downloaded from: https://www.axiomatic.com/wp-content/uploads/pr-ax030570-june2022.pdf.

Axiomatic Technologies Corporation has released a dual 12 Vdc, 1.2A lithium-ion battery charger suited for use in harsh conditions.

The AX090690 unit charges two 12 Vdc, 1.2A lithium batteries. It has a typical efficiency rating of 89%. The battery charge status is communicated over CAN.

Protections on this IP67 rated unit include reverse voltage protection, surge protection, under- and over-voltage shutdown, short circuit and overcurrent protection, and thermal protection for overtemperature.

This battery charger is suitable for lithium-ion battery charging applications on vehicle CAN based systems, such as mining equipment, off-highway equipment, fire trucks, and municipal vehicles.

Contact: Amanda Wilkins, Chief Marketing Officer
TEL: +1 905 602 9270 x224
[email protected]

A PDF version of this press release may be downloaded from: https://www.axiomatic.com/wp-content/uploads/pr-ax090690-june2022.pdf.

Axiomatic Technologies Corporation has developed controllers that accept seven universal signal inputs.

The AX1800X0 7 universal signal, 3 RTD inputs, 2 digital outputs controller can be networked to a SAEJ1939 or Modbus TCP/IP fieldbus (in Model AX180000 only). The rugged power supply accepts 12 or 24 Vdc nominal and operates from -40 to 85ºC. The sophisticated control algorithms allow the user to program the controller for a wide range of applications without the need for custom software.

Protections on this IP20 rated unit include forward and reverse polarity protection, transient protection, and short circuit to ground protection. The enclosure is DIN rail mount.

This controller is suited for a wide range of applications, such as industrial control panels, power gen set engine control systems, oil and gas equipment automation, and machine automation.

Contact: Amanda Wilkins, Chief Marketing Officer
TEL: +1 905 602 9270 x224
[email protected]

A PDF version of this press release may be downloaded from: https://www.axiomatic.com/wp-content/uploads/pr-ax1800X0-june2022.pdf.

Axiomatic Technologies Corporation has developed a range of temperature scanners that can be reliably used in even the harshest environments.

The AX180800 Temperature Scanner monitors up to 20 thermocouples and 2 RTD’s to provide the temperature information to the engine control system over SAE J1939 CAN bus. The channels are independently configurable as Type J, K, B, E, N, R, S or T thermocouples. Temperature information can include exhaust temperature, winding temperature, and fluid temperature monitoring. All 20 channels of temperature data are automatically sent over the CAN bus when power is applied with no additional programming or configuration required.

In addition to the TC and RTD inputs, there are 4 universal signal command inputs and 6 Form C relay outputs. Integral diagnostics determine thermocouple integrity. All inputs are fully isolated from the CAN lines, and from the power supply. The two CAN channels are fully isolated from one another in the hardware which allows for different CAN networks to be connected. In the software, each will also act independently where incoming or outgoing messages can be configured to receive or send on a specific CAN channel. Modbus TCP/IP communications are also available.

The scanner is enclosed in a rugged IP67 rated enclosure and is suitable for use in control systems for industrial and marine power generator sets.

Contact: Amanda Wilkins, Chief Marketing Officer
TEL: +1 905 602 9270 x224
[email protected]

A PDF version of this press release may be downloaded from: https://www.axiomatic.com/wp-content/uploads/pr-ax180800-may2022.pdf.

Axiomatic Technologies Corporation releases a new controller with four universal signal inputs.

The AX030440 controller accepts four universal signal inputs that are configurable as Voltage, Current, Resistive, Frequency, PWM, and Digital. It communicates through CANopen®. This IP67 rated unit has reverse polarity protection and under- and over-voltage protections. It is also protected against short to GND and shorts to Nominal Vps.

Axiomatic designs valve controllers for a wide range of applications such as machine automation.

Contact: Amanda Wilkins, Chief Marketing Officer
TEL: +1 905 602 9270 x224
[email protected]

A PDF version of this press release may be downloaded from: https://www.axiomatic.com/wp-content/uploads/pr-ax030440-may2022.pdf.

Axiomatic Technologies Corporation has developed a range of protocol converters to support data exchange between 2 CAN networks and RS-422.

The protocol converters in the AX14032X series act as a gateway or interface between CAN buses with different baud rates and protocols (SAE J1939 to SAE J1939 or SAE J1939 to CANopen®). They also facilitate fast data exchange between a CAN network (SAE J1939 or CANopen®) and a RS-422 bus (SAE J1587 or Modbus RTU). They are operational from 9 to 36 Vdc.

 

Protections on these fully sealed IP67 rated units include surge protection and reverse polarity protection.

Axiomatic designs protocol converters that are suited for a wide range of applications, such as mobile (off-highway) equipment, transport vehicles, and power genset control systems.

Contact: Amanda Wilkins, Chief Marketing Officer
TEL: +1 905 602 9270 x224
[email protected]

A PDF version of this press release may be downloaded from: https://www.axiomatic.com/wp-content/uploads/pr-ax14032x-may2022.pdf.

Axiomatic Technologies Corporation has developed a line of rugged Automotive Ethernet Converters for ethernet automation on mobile equipment.

The prevalence of ethernet networking in off-highway vehicles is growing. Automotive Ethernet and Ethernet networks provide high speed, low latency real time communications for simple controls as well as high-speed sophisticated attachments such as high-resolution cameras used in modern machines.

Axiomatic Automotive Ethernet Converters interface between legacy Ethernet vehicle control systems or CAN based networks and newer, lower cost, 2-wire Automotive Ethernet based devices.

The AX141520 Protocol Converter connects 1 Automotive Ethernet port (1000 Mbps) to 1 Ethernet port (1000 Mbps) and has Power, Link and Activity LED indicators. It carries an IP67 rating.

The AX141530 Protocol Converter interfaces between CAN bus (CAN 2.0B) and Automotive Ethernet (100 Mbps). It also has Power, Link and Speed LED indicators and an IP67 rating.

The AX141500 is a simple Converter that connects 1 Automotive Ethernet port (100 Mbps) to 1 Ethernet port (100 Mbps).

Axiomatic controls feature compliance for harsh environments with surges, load dump, power transients as well as exposure to dust, water, humidity, and vibration. They are designed for utilization on outdoor machines.

Contact: Amanda Wilkins, Chief Marketing Officer
TEL: +1 905 602 9270 x224
[email protected]

A PDF version of this press release may be downloaded from: https://www.axiomatic.com/wp-content/uploads/pr-automotiveethernet-jan2022.pdf.

Axiomatic releases a new isolated power supply with wide ranging input voltage for 24V, 36V or 48V battery interface and it provides 24V, 350W of power for electronic devices on rugged machines.

The AX080300 power converter accepts 24V, 36V or 48Vdc nominal input and provides 24Vdc, 350 Watts output power. It features input and output isolation as well as an enable signal. Typically, efficiency is 93%. Protection includes: thermal protection for over temperature; reverse battery; over and under-voltage protection; short circuit; and overcurrent protection. It operates from -40 to 85 °C (-40 to 185 °F). Axiomatic controls and converters are compliant for harsh electrical and outdoor environments with protection against surges, load dump, power transients as well as exposure to dust, water, humidity, and vibration.

Axiomatic designs controls and power converters for autonomous vehicles in industrial and mining applications.

Applications:

  • Autonomous Vehicles including forklifts.
  • Industrial forklift automation.
  • Off-highway machine automation.

Contact: Amanda Wilkins, Chief Marketing Officer
TEL: +1 905 602 9270 x224
[email protected]

A PDF version of this press release may be downloaded from: https://www.axiomatic.com/wp-content/uploads/pr-ax080300-jan2022.pdf.

Axiomatic controllers provide safe, affordable, and precise control of solenoids for off-highway machine hydraulic systems.

The AX022950 controller was designed for SIL 2 applications for safe operation in critical operations for off-highway machines.

The AX022950 features 12VDC or 24VDC nominal power input, 7 Digital Inputs for Switches and Proximity Sensors, 6 Digital Outputs up to 4A for On/Off Hydraulic Valves (4 high sourced and 2 low sourced) and 4 Sourcing LED Outputs (up to 50 mA). There is 1 CAN (SAE J1939) port for control networking and its enclosure is IP67 rated. It meets the EMC, environmental and vibration requirements of off-highway equipment applications.

Other Axiomatic rugged solenoid controllers offer compact and affordable solutions for distributed control on machines.

Contact: Amanda Wilkins, Chief Marketing Officer
TEL: +1 905 602 9270 x224
[email protected]

A PDF version of this press release may be downloaded from: https://www.axiomatic.com/wp-content/uploads/pr-AX022950-jan2022.pdf.