Axiomatic releases a rugged 48 to 24 VDC, 18 W Isolated DC-DC Converter, suitable for use in harsh conditions.
August 27, 2025The AX082410 has an input range of 36 to 72 VDC and a regulated 24 VDC, 18 W output. Its typical efficiency of 88% helps minimize energy loss. This 48VDC/24VDC Converter features reverse battery, overvoltage, undervoltage, short circuit, overcurrent, and over-temperature protection. Built with a molded nylon enclosure and an integral 4-pin TE Deutsch equivalent […]
Read MoreAxiomatic releases two rugged Dual LED Outputs Controllers with CAN (SAE J1939 or CANopen®), suitable for use in harsh conditions.
July 10, 2025The two Dual LED Outputs Controllers support two independent LED outputs. Each output is capable of driving LEDs from 20 mA up to 600 mA, providing ample power for a variety of lighting configurations of up to 28 V. The outputs offer dual control modes, allowing for both Direct Current (DC) operation for steady illumination […]
Read MoreAxiomatic releases two rugged LIN / CAN Converters (SAE J1939 or CANopen®) with powerful microcontrollers, suitable for use in harsh conditions.
June 19, 2025The two new LIN/CAN converters from Axiomatic facilitate bidirectional data exchange between a LIN and a CAN network. The AX140620 supports SAE J1939 while the AX140621 uses CANopen® protocol. Both modules comply with LIN 2.2A specification and can be configured as Master or Slave. The AX140620 supports 130 LIN Signals, 25 LIN Unconditional Frames, 25 […]
Read MoreAxiomatic releases a compact and rugged Bidirectional 200 mA Dual Servo Valve Controller (SAE J1939) with a Powerful Microcontroller.
May 20, 2025The Bidirectional 200 mA Dual Servo Valve Controller provides two outputs selectable as servo valve control or proportional current type. The outputs can also be configured as 1 full H-bridge output. The selectable current ranges are ±50 mA, ±100 mA, and ±200 mA. The device features a new microcontroller with more memory which allows the […]
Read MoreAxiomatic releases a rugged 4 Inputs, 4 Outputs Universal Signal Controller with Isolated CAN (SAE J1939), suitable for use in harsh conditions.
May 15, 2025The AX030430 controller accepts four universal signal inputs and provides four universal signal outputs. The user can configure the individual inputs to receive the following signals: Voltage, Current, Resistive, Digital, Frequency, PWM, or Counter. Two of the four inputs are isolated. The four outputs can be programmed to provide Voltage, Current, Digital, Frequency, or PWM […]
Read MoreAxiomatic releases a compact and rugged CAN-Bluetooth® Beacon Gateway to receive sensor BLE messages and transmit them over a CAN network.
March 20, 2025The AX141156 CAN-Bluetooth® Beacon Gateway receives Bluetooth® Low Energy (BLE) messages from tire pressure sensors or other Bluetooth beacons and sends that data over a machine’s CAN (SAE J1939) network. It supports up to eight beacons simultaneously. It uses Bluetooth® Low Energy (BLE) V5.2 standards. The device can be configured wirelessly using the CAN2BLE Configuration […]
Read MoreAxiomatic is developing a precision LVDT Signal Conditioner.
March 19, 2025The AX130410 controller simulates an LVDT signal with high precision for use in various industrial applications. High precision is achieved by the use of FPGA technology. The signal conditioner interfaces with various communication networks to provide a command message and generates two (2) isolated outputs of 1-5VAC. An internal oscillator outputs at 400Hz +/- 0.1% […]
Read MoreAxiomatic is developing an isolated, CAN enabled 24VDC/24VDC converter with 350W power output.
March 19, 2025The CAN connection allows for real time diagnostics, controlled shutdowns, and other helpful features. Wake-on-CAN functionality is utilized to reduce power consumption. Accessing the SAE J1939 CAN network is a new feature in the family of Axiomatic Isolated 24V/24V DC Power Converters. The AX080310 operates from 10 to 40VDC with reverse polarity, undervoltage and overvoltage […]
Read MoreAxiomatic is showcasing at BAUMA 2025 a new valve controller with 4 signal inputs, 8 proportional outputs, and 2 SAE J1939 ports. It features Wake-on-CAN for power saving.
March 18, 2025The AX020800 valve controller accepts 4 Universal Command Signal Inputs as Voltage (0-2.5, 0-10V), Current (0-20, 4-20mA), Resistive (up to 250kΩ), Frequency/PWM (up to 10kHz), or Digital types from sensors, joysticks, switches or pushbuttons. The device interfaces with 2 SAE J1939 CAN networks using auto-baud-rate detection and utilizes a Wake-on-CAN function to save on power. […]
Read MoreAxiomatic is showcasing at BAUMA 2025 a new 9-Channel CAN Router with Ethernet Port for rapid and bi-directional data exchange on machine networks.
March 1, 2025The AX141620 controller may be configured as a switch to broadcast messages on all ports, or it can modify an address or change a source address before sending it out on another port. It features configurable baud rate and a configurable termination resistor avoiding the need for external resistors. An individual bicolour LED indicates status […]
Read More