Axiomatic Releases a New RTD Module with 2 Pt100 Inputs and 1 Signal Input, Designed to Monitor and Control Engine Temperature in Rugged Conditions
October 30, 2025The AX184300 controller is designed for the harsh and rugged conditions of engine and power generator set applications. AX184300 accepts one universal signal input, features an SAE J1939 CAN port with auto-baud-rate detection, and reads two 3-wire Pt100 RTD sensors. All logical function blocks are inherently independent from one another but can be configured to […]
Read MoreAxiomatic Releases a High-Performance Automotive Ethernet Switch, Suited for Off-Highway and Industrial Applications
October 23, 2025The AX141570 Gigabit Automotive Ethernet Switch is designed for off-highway and industrial applications requiring high performance 100/1000BASE-T1 Automotive Ethernet connectivity. AX141570 features LED indicators on the front panel of the housing that display Power, Link, Activity, and Speed status. AX141570 — 6 Port Gigabit Automotive Ethernet Switch AX141570 features 6 Automotive Ethernet ports with an […]
Read MoreAxiomatic Releases a Galvanically Isolated CAN-Repeater, Suited for Railway Equipment
October 16, 2025The AX140180 CAN-Repeater acts as a gateway or interface between multiple CAN buses. The CAN ports and power ports are galvanically isolated from each other with 500 VDC isolation. AX140180 features an isolated SAE J1939 CAN port for configuration and a CAN 2.0A/2.0B port that supports data frames and remote frames with standard and extended […]
Read MoreAxiomatic Releases a Rugged 12 Signal Outputs CAN Controller (SAE J1939) with Isolation, Suitable for use in Mobile Equipment with On-Board Battery Power
October 9, 2025The 12 Signal Outputs Controller supports 12 analog or digital type outputs programmable as voltage, current, frequency, PWM, or digital. AX030590 is designed to interface with a machine’s SAE J1939 CAN network and features auto-baud-rate detection. The AX030590 controller offers a wide-ranging power supply input selection of 12, 24, or 48 VDC nominal (9 to […]
Read MoreAxiomatic Releases Two Gigabit Automotive Ethernet to Gigabit Ethernet Converters Suitable for On-Highway and Off-Highway Applications
September 15, 2025The Axiomatic AX141560 and AX141560A Gigabit Automotive Ethernet to Gigabit Ethernet Converters provide a purely physical, bi-directional conversion between Automotive Ethernet (1000BASE-T1) and Ethernet (1000BASE-T) via PHY transceivers. Baud rates of 100 Mbit/s and 1 Gbit/s (1000 Mbit/s) are supported and can be set through the RS-232 interface. The table below provides an explanation of […]
Read MoreAxiomatic releases a rugged 48 to 24 VDC, 18 W Isolated DC-DC Converter, suitable for use in harsh conditions.
August 27, 2025The AX082410 has an input range of 36 to 72 VDC and a regulated 24 VDC, 18 W output. Its typical efficiency of 88% helps minimize energy loss. This 48VDC/24VDC Converter features reverse battery, overvoltage, undervoltage, short circuit, overcurrent, and over-temperature protection. Built with a molded nylon enclosure and an integral 4-pin TE Deutsch equivalent […]
Read MoreAxiomatic releases two rugged Dual LED Outputs Controllers with CAN (SAE J1939 or CANopen®), suitable for use in harsh conditions.
July 10, 2025The two Dual LED Outputs Controllers support two independent LED outputs. Each output is capable of driving LEDs from 20 mA up to 600 mA, providing ample power for a variety of lighting configurations of up to 28 V. The outputs offer dual control modes, allowing for both Direct Current (DC) operation for steady illumination […]
Read MoreAxiomatic releases two rugged LIN / CAN Converters (SAE J1939 or CANopen®) with powerful microcontrollers, suitable for use in harsh conditions.
June 19, 2025The two new LIN/CAN converters from Axiomatic facilitate bidirectional data exchange between a LIN and a CAN network. The AX140620 supports SAE J1939 while the AX140621 uses CANopen® protocol. Both modules comply with LIN 2.2A specification and can be configured as Master or Slave. The AX140620 supports 130 LIN Signals, 25 LIN Unconditional Frames, 25 […]
Read MoreAxiomatic releases a compact and rugged Bidirectional 200 mA Dual Servo Valve Controller (SAE J1939) with a Powerful Microcontroller.
May 20, 2025The Bidirectional 200 mA Dual Servo Valve Controller provides two outputs selectable as servo valve control or proportional current type. The outputs can also be configured as 1 full H-bridge output. The selectable current ranges are ±50 mA, ±100 mA, and ±200 mA. The device features a new microcontroller with more memory which allows the […]
Read MoreAxiomatic releases a rugged 4 Inputs, 4 Outputs Universal Signal Controller with Isolated CAN (SAE J1939), suitable for use in harsh conditions.
May 15, 2025The AX030430 controller accepts four universal signal inputs and provides four universal signal outputs. The user can configure the individual inputs to receive the following signals: Voltage, Current, Resistive, Digital, Frequency, PWM, or Counter. Two of the four inputs are isolated. The four outputs can be programmed to provide Voltage, Current, Digital, Frequency, or PWM […]
Read More