Axiomatic Technologies Corporation releases a series of Isolated DC/DC Converters for 12Vdc, 24Vdc and 48Vdc device power on heavy equipment.
The Isolated DC/DC Converters interface with 12Vdc batteries to provide clean power for radios or other devices. They accept a low voltage input range down to 5Vdc in order to remain active during engine cranking which ensures the radio operation is unaffected. Operation is also maintained during load dump.
The AX083120 model provides 48 Watts of 12Vdc power with isolation.
The AX083130 model provides 60 Watts of 24Vdc power with isolation.
The AX083110 model provides 60 Watts of 48Vdc power with isolation.
The compact converters can be configured in parallel for redundancy or power sharing operations.
Axiomatic converters feature compliance for harsh environments with surges, load dump, power transients as well as exposure to dust, water, humidity, and vibration.
Other Axiomatic isolated DC/DC converters for on-highway and off-highway vehicle applications include both step down and step up power conversions for 110Vdc/24Vdc; 110Vdc/12Vdc; 96Vdc/24Vdc; 96Vdc/12Vdc; 72Vdc/24Vdc; 72Vdc/12Vdc; 48Vdc/24Vdc; 48Vdc/12Vdc; 24Vdc/14Vdc; 24Vdc/12Vdc; 12Vdc/24Vdc; 12Vdc/27Vdc; 24Vdc/48Vdc; and 24Vdc/120Vdc.
Contact: Amanda Wilkins, Chief Marketing Officer
TEL: +1 905 602 9270 x224
[email protected]
Axiomatic Technologies Corporation releases a new Discrete I/O module with 8 Form C relay outputs for engine applications.
The compact Discrete I/O Module reads 12 discrete inputs and sets 8 Form C relay outputs while networking with other CAN devices (SAE J1939 or CANopen®). The unit is a battery powered device with the ability to withstand engine cranking, reverse polarity, and transient power conditions. In engine applications, information is provided to the engine control system using single frame J1939 application-specific PDU2 type messages. Outputs can be controlled by any input or CAN message.
The AX031850 has configurable setpoints that allow the user to configure it for their application. The Windows-based Electronic Assistant can be used to configure the module over the CAN line. The setpoints can also be saved to a file and flashed into other AX031850 modules over the CAN bus. Settings are saved to non-volatile memory upon command.
The AX031850 features a rugged enclosure, gasketing and watertight connectors for an IP67 rating.
Applications:
- Throttle controls for marine engine applications.
- Auxiliary I/O for Genset applications.
- Servo applications.
Other Axiomatic products with relay outputs include the AX030210, AX030211, AX031800, AX031801, AX031851, AX130750, AX130751, AX130770, AX130771, AX031901, AX030911, AX031950, AX031200 and AX031201.
Note: CANopen® is a registered community trademark of CAN in Automation e.V
Contact: Amanda Wilkins, Chief Marketing Officer
TEL: +1 905 602 9270 x224
[email protected]
Axiomatic releases a compact 48V or 24V to 14V, 16.8V or 27V Converter/Charger.
In CAN based systems, utilize a compact 24Vdc/14Vdc, 2A Charger/Converter.
Features:
- 24Vdc/14Vdc, 2A (28 Watts) Converter.
- Other models include: 48V/14V (Model AX090650) or 48V/16.8V (Model AX090680) or 48V/27V (Model AX090670).
- 14Vdc, 2A Battery Charger for SLA or AGM batteries.
- Typical charging efficiency of 91% (12Vdc battery).
- Non-isolated.
- 1 CAN port (SAE J1939) – Battery charge status is communicated over CAN.
- Operates from 26Vdc-36Vdc.
- Typical efficiency of 91%.
- Thermal protection for over temperature.
- Reverse battery, over and under-voltage protection
- Short circuit and overcurrent protection.
- -40 to 70 °C (-40 to 158 °F) operating temperature.
- Compact, ultrasonic welded enclosure.
- 8-pin TE Deutsch type connector.
- LED Indicator.
- IP67.
- EMI/EMC compliant.
- User configurable with the Axiomatic Electronic Assistant USB-CAN converter and sofware.
Applications: The Charger/Converter is suitable for application on vehicle CAN based systems.
- Off-highway Equipment.
- Fire trucks and municipal vehicles.
Axiomatic designs and manufactures electronic machine controls, power converters, gateways and motor controls for the off-highway, mining, on-highway, bus, electric vehicle, rail, power generation, material handling, industrial and alternate energy markets. We provide efficient, innovative solutions that focus on adding value for our customers. We emphasize service and partnership with our customers, suppliers, and employees to build long term relationships and mutual trust.
Contact: Amanda Wilkins, Chief Marketing Officer
TEL: +1 905 602 9270 x224
[email protected]
Manage 110V/96V/72V battery power to 24V or 12V sensitive electronic devices using the Axiomatic AX08320X DC/DC Converters.
Features:
- 110V, 96V or 72Vdc nominal input,
- Wide input voltage range (20V to 137V, some derating of output regulation for input less than 42V),
- 24Vdc, 240 Watts output or 12Vdc, 240 Watts output,
- Isolated,
- Optional Enable signal,
- Typical efficiency of 92%,
- Input inrush current limit,
- Thermal protection for over temperature,
- Reverse battery, over and under-voltage
protection,
- Short circuit and overcurrent protection,
- -40 to 85 °C (-40 to 185 °F) operating temperature with some derating,
- 1 6-pin connector,
- Can be used in a current sharing configuration,
- Redundancy for parallel application,
- EMI/EMC compliant,
- Suitable for high vibration, high shock environments,
- IP67 protection.
Applications:
- Mining vehicles,
- Railway Rolling Stock,
- Off-highway vehicles,
- Oilfield services equipment.
Axiomatic designs and manufactures electronic machine controls, power converters, gateways and motor controls for the off-highway, mining, on-highway, bus, electric vehicle, rail, power generation, material handling, industrial and alternate energy markets. We provide efficient, innovative solutions that focus on adding value for our customers. We emphasize service and partnership with our customers, suppliers, and employees to build long term relationships and mutual trust.
Contact: Amanda Wilkins, Sales and Marketing Manager
TEL: +1 905 602 9270 x224
[email protected]
A PDF version of this press release may be downloaded from: https://www.axiomatic.com/wp-content/uploads/pr-AX08320X-december2019.pdf
Axiomatic releases an Automotive Ethernet Converter for rugged applications.
The Axiomatic Automotive Ethernet Converter provides a purely physical, bi-directional conversion between Automotive Ethernet (100BASE-T1), and Ethernet (100BASE-TX) via PHY transceivers. No packets are stored or modified in this device. The converter supports a baud rate of 100 Mbit/s. Status LEDs provide information on connection link, and communication.
The converter is designed to work on off-road machinery or in a harsh industrial environment with power transients, high humidity and vibrations.
Other Axiomatic connectivity products include the Ethernet Switch, CAN/Ethernet Converter as well as the CAN-Bluetooth Bridge.
Contact: Amanda Wilkins, Sales and Marketing Manager
TEL: +1 905 602 9270 x224
[email protected]
A PDF version of this press release may be downloaded from: https://www.axiomatic.com/wp-content/uploads/pr-AX141500-october2019.pdf.
Axiomatic products feature auto-detect baud rates for SAE J1939 networks.
Axiomatic SAE J1939 products can operate at standard 250 kbit/s and 500 kbit/s baud rates or a non-standard 1Mbit/s baud rate. The required baud rate is detected automatically upon connection to the CAN network. Auto Baud Rate Detection (ABR) functionality is implemented in our inclinometer and gyroscope family and will be extended to other Axiomatic valve controllers and I/O modules in 2020.
All SAE J1939 controller original configuration can be changed using the Axiomatic Electronic Assistant PC-based configuration tool.
Axiomatic offers I/O modules, valve controllers, motor controllers, triaxial inclinometers, ethernet switches for autonomous vehicles, CAN/Ethernet gateways, Automotive Ethernet-Ethernet Converters, and a laser receiver for mining or construction equipment machine applications.
We innovate with engineered and off-the-shelf machine controls.
Contact: Amanda Wilkins, Sales and Marketing Manager
TEL: +1 905 602 9270 x224
[email protected]
A PDF version of this press release may be downloaded from: https://www.axiomatic.com/wp-content/uploads/pr-auto-detectbaudrate-aug19.pdf.
Axiomatic now offers a Triaxial Inclinometer Gyroscope for moving machines with CANopen.
Part of a growing family of inclinometers for machine control, the AX060900, AX060910 and AX060911 measure pitch and roll inclination angles in a full ±180-degree orientation range. The angles can be compensated by a 3D gyroscope to minimize the influence of dynamic linear accelerations caused by vibrations and machine operational movements.
The units can also output: gravity angle; pitch, roll and yaw angular rates; and unit accelerations in three orthogonal directions. The inclinometers transmit angular data over CAN bus using a standard J1939 or CANopen protocol. Models AX060910 and AX060911 offer greater shock resistance.
The unit original configuration can be changed using Axiomatic Electronic Assistant PC-based configuration tool.
Axiomatic also offers triaxial inclinometers, tilt sensors, ethernet switches, CAN/Ethernet gateways, a rugged display and laser receiver for machine control applications.
Applications:
- Level, tilt, pitch and acceleration monitoring in agricultural, off-highway and mining equipment,
- Platform levelling and stabilization in industrial machines,
- Robotics position sensing,
- Navigation system component.
We innovate with engineered and off-the shelf machine controls.
Contact: Amanda Wilkins, Sales and Marketing Manager
TEL: +1 905 602 9270 x224
[email protected]
Axiomatic releases a CAN bus (SAE J1939 or CANopen) connected Single Valve Controller with DIN 43650A mounting style.
The CAN Single Valve Controller, p/n: AX021100, accepts SAE J1939 and p/n: AX021101 accepts CANopen messages to command a solenoid up to 2.5A. Powered by 12V or 24V machine batteries, the DIN 43650A mounting style locates the electronics directly on the valve for distributed control. Other form factors available include a remote mount model, a plug-in for valve molded TE Deutsch DT20 connectors and a DIN rail mount model for control panels. The DIN 43650A models include: analog command inputs and economy versions with fixed parameters. The electronic controls are designed for machine applications with vibration compliance, IP67 rating, and operation from -40 to +85°C. An LED indicator provides status of operation and the M12 connector simplifies wiring.
We innovate with engineered and off-the shelf machine controls.
Axiomatic is exhibiting at BAUMA 2019.
Come and see us in booth A2/449. The product is also displayed in the CiA booth A2/337.
Contact: Amanda Wilkins, Sales and Marketing Manager
TEL: +1 905 602 9270 x224
[email protected]
Using Near Field Communication (NFC), the NFC valve controller is configurable while unpowered. It can be configured from an Android phone application in proximity to the NFC controller.
As a highly flexible controller, the AX022420 valve controller with NFC accepts two command signal inputs and drives two solenoids up to 3A. Other interfaces can include a magnetic pick up sensor and encoder. The outputs are user selectable as high side, low side or half-bridge type. Many control profile parameters are user configurable. A DIN rail mount and a fully sealed IP67 form factor are available. Operation is from -40 to 85 °C. Designed to interface with 12V or 24V battery power, it is suitable for machine and industrial applications.
Using Near Field Communication (NFC), the valve controller is remotely configurable while unpowered via a smartphone application available from Google Play. Bringing the two devices within 2 cm (1 inch) of each other, the NFC technology uses magnetic induction between two loop antennas to communicate within the globally available radio frequency ISM band of 13.56 MHz. Communications have password protection built-in to the NFC technology which is often used in secure retail point-of-sale transactions.
Applications:
- Control panels,
- Machine automation.
Axiomatic also offers gateways to CAN bus networks using Ethernet, Bluetooth, and WiFi (coming soon).
We innovate with engineered and off-the shelf machine controls.
Axiomatic is exhibiting at BAUMA 2019.
Come and see us in booth A2/449.
Contact: Amanda Wilkins, Sales and Marketing Manager
TEL: +1 905 602 9270 x224
[email protected]