CAN to PWM Signal Controller, CANopen®
Item # AX130701 — CAN to PWM Signal Controller, CANopen®
The CAN to PWM Signal Controller features 1 PWM signal output to communicate with an engine ECM. The output is user configurable as PWM, frequency, or digital. This product meets the surge requirements of SAE J1445 and is designed for EMC compliance. It has 1 isolated CAN (CANopen®) port to read engine speed messages or other engine information.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Technical Specifications
CAN to PWM Signal Controller, CANopen®
Order Code
P/N: AX130701
Output(s)
1 output user selectable as follows.
PWM, frequency, mixed output (1 Hz to 20 kHz)
Digital On/Off (5 or 12 V amplitude)
Communications
1 CAN port (CANopen®)
Operating Voltage
12 V or 24 Vdc Nominal
Control Logic
Standard embedded software is provided.
Enclosure
Plastic Enclosure, Nylon 6-6 with 30% glass fill
Integral TE Deutsch Connector
3.030 x 2.413 x 1.314 Inches
77.0 x 61.3 x 33.4 mm (L X W X H)
Connection(s)
6 pin TE Deutsch connector P/N: DT04-6P.
Protection Rating
IP67
Operating Temperature
-40 to 85 ºC
-40 to 185 ºF
Compliance
CE / UKCA marking
User Configurability
An EDS file is provided to interface with standard CANopen® configuration tools.
Applications
Off-Highway Equipment Controls
Power Generator Set Control Systems
Engine Controls
Accessories
AX070119, Mating Plug Kit (DT06-6S, W6S, 6 Contacts)
Datasheet
User Manual
EDS
2D Drawing
Step Files (3D)
4 Inputs, 8 Proportional Outputs Valve Controller, CANopen®
20 Channel Thermocouple Scanner, Full Isolation, SAE J1939
4 Digital Inputs Modbus Router, Modbus TCP/IP, SAE J1939
4 Universal Signal Outputs CAN Controller, CANopen®, Compact
4 Universal Input CAN Controller, +5V/8V Reference with Feedback Signal, CANopen®
Wire Harness (DTP06-4S Mating Plug, 2m (6.5ft.) 12 AWG Unterminated Wires)
4 Inputs, 4 Outputs Isolated Controller, SAE J1939
2 RTD Inputs, 2 Outputs Intelligent Load Control Switch, CANopen®, Modbus RTU, Ethernet, Wi-Fi
12 Inputs, 12 Proportional & 2 Relay Outputs Controller, 2 SAE J1939, Ethernet
Interface Module, 16 Inputs, 15 Outputs, SAE J1939
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories