6 Inputs, 5 Outputs Valve Controllers
The valve controllers generate precise, repeatable control of five proportional or on/off solenoids over an SAE J1939 CAN bus network and accept four analog/digital/PWM inputs and two frequency/digital inputs for interfacing to a PLC, Engine Control Module, or command potentiometers. A power input voltage of 12 or 24 VDC nominal (8 to 36 VDC) is necessary for operation. Diagnostics messages are provided over the CAN network for the status of inputs or outputs. Each controller can be configured to measure the input value and send the data to a CAN network using the Axiomatic Electronic Assistant. Additionally, the controller outputs can be configured to use any of the on-board inputs as either a control signal or an enable signal, instead of taking the control information from the CAN bus.
6 Inputs, 5 Outputs Valve Controllers
The valve controllers generate precise, repeatable control of five proportional or on/off solenoids over an SAE J1939 CAN bus network and accept four analog/digital/PWM inputs and two frequency/digital inputs for interfacing to a PLC, Engine Control Module, or command potentiometers. A power input voltage of 12 or 24 VDC nominal (8 to 36 VDC) is necessary for operation. Diagnostics messages are provided over the CAN network for the status of inputs or outputs. Each controller can be configured to measure the input value and send the data to a CAN network using the Axiomatic Electronic Assistant. Additionally, the controller outputs can be configured to use any of the on-board inputs as either a control signal or an enable signal, instead of taking the control information from the CAN bus.
Showing all 4 results
