4 Channel Strain Gauge CAN Controller with Wire Break Detection, SAE J1939
Item # AX200300 — 4 Channel Strain Gauge CAN Controller with Wire Break Detection, SAE J1939
The 4 Channel Strain Gauge CAN controller with Wire Break Detection accepts up to four 4-wire strain gauge connections. The input range is user selectable from +/-19.5 mV to +/-2.5 V. It interfaces with the machine’s CAN network (SAE J1939). The measurement rate is up to 40,000 samples per second (SPS). Standard embedded software is provided. Rugged IP67 rated enclosure and a power supply input of 12Vdc or 24Vdc nominal suits applications in the harsh environment of mobile equipment with on-board battery power. Settings are user configurable.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Order Code
P/N: AX200300
Input(s)
1 digital input (Active High or Active Low)
Strain Gauge Inputs
4 channels for inputs from 4-wire full bridge strain gauges:+/- 19.5 mV to +/- 2.5 Vdc (Selectable).
Excitation Connections
4 +5V Excitation Connections
Wire Break Detection
Provided
Output(s)
1 analog/digital output selectable as follows.
0-10V
0-24mA
Digital On/Off
1 interlock relay output with 2 contact pins
Communications
1 CAN port (SAE J1939)
CAN Baud Rate
250 kbit/s, 500 kbit/s, 667 kbit/s, and 1 Mbit/s with auto-baud-rate detection
Operating Voltage
12 or 24Vdc Nominal Operating Voltage
8…36 Vdc Power Supply Range for Voltage Transients
Control Logic
Standard embedded software is provided.
Enclosure
High temperature nylon housing
TE Deutsch P/N: EEC-325X4B
Connection(s)
1x 24-pin connector, TE Deutsch P/N: DTM13-12PA-12PB-R008
Protection Rating
IP67
Operating Temperature
-40 to 85 ºC
-40 to 185 ºF
Applications
Construction equipment
Lift equipment
Cranes
Accessories
PL-DTM06-12SA-12SB, Mating Plug KIT (DTM06-12SA, DTM06-12SB, 2 WM-12S, 24 Contacts, 18 Plugs)
AX070502, Axiomatic Electronic Assistant KIT (AX070501 USB-CAN Converter, 2 Cables, Installation Instructions)
AX070506K, Axiomatic Electronic Assistant KIT III (AX070506 USB-CAN Converter, 3 Cables, Installation Instructions)
Datasheet
User Manual
2D Drawing
Step Files (3D)
Compliance
Related Products
4 Magnetic Pickup Inputs CAN Converter, SAE J1939
0-10VDC Analog Input, 0.13A Output Economy Valve Controller, DIN Rail Mount
3 Universal Inputs, H-Bridge Output, 5A Motor Controller, SAE J1939
4 Inputs, 8 Proportional Outputs Valve Controller, CANopen®
20 Channel Thermocouple Scanner, Isolated, SAE J1939
4 Digital Inputs Modbus Router, Modbus TCP/IP, SAE J1939
4 Universal Signal Outputs CAN Controller, CANopen®, Compact
4 Universal Input CAN Controller, +5V/8V Reference with Feedback Signal, CANopen®
Wire Harness (DTP06-4S Mating Plug, 2m (6.5ft.) 12 AWG Unterminated Wires)
4 Inputs, 4 Outputs Isolated Controller, SAE J1939
2 RTD Inputs, 2 Outputs Intelligent Load Control Switch, CANopen®, Modbus RTU, Ethernet, Wi-Fi
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories