4 Universal Input CAN Controller, +5V/8V Reference with Feedback Signal, CANopen®
Item # AX030451 — 4 Universal Input CAN Controller, +5V/8V Reference with Feedback Signal, CANopen®
The 4 Universal Input CAN Controller features four universal inputs configurable as voltage, current, resistive, frequency, PWM, or digital. The controller operates from a 12 or 24 VDC nominal input (8 to 36 VDC) and communicates through a CANopen® network. AX030451 is user configurable via standard CANopen® tools. Additionally, an EDS file is provided for configuration. Users can select a +5 V or +8 V reference with feedback signal. The unit features a compact IP67 enclosure and an integral TE Deutsch equivalent connector. The controller is designed for the demands of power generator set applications and/or industrial environment applications.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Technical Specifications
4 Universal Input CAN Controller, +5V/8V Reference with Feedback Signal, CANopen®
Order Code
P/N: AX030451
Input(s)
4 universal signal inputs are user selectable as follows:
Voltage (0-5 V, 0-10 V)
Current (0-20 mA, 4-20 mA)
Resistive (30 Ω to 250 kΩ)
Frequency/PWM (1-10,000 Hz)
Digital (active high, active low)
Reference Voltage(s)
+5V or +8V with feedback signal (user selectable)
Communications
1 CAN port (CANopen®)
CAN Baud Rate
10 kbit/s, 20 kbit/s, 50 kbit/s, 100 kbit/s, 125 kbit/s, 250 kbit/s, 500 kbit/s, 667 kbit/s, 800 kbit/s, or 1 Mbit/s
Operating Voltage
12/24 VDC nominal (8-36 VDC)
Control Logic
Standard embedded software is provided.
The user programmable functionality is accessible via standard CANopen® configuration tools (not supplied).
Enclosure
Molded enclosure, integral TE Deutsch equivalent connector
Nylon 6/6, 30% glass, ultrasonically welded
Flammability rating: UL 94V-0
Connection(s)
1x 12-pin connector, equivalent to TE Deutsch P/N: DTM04-12PA
Protection Rating
IP67
Operating Temperature
-40 to 85 ºC
-40 to 185 ºF
User Configurability
An EDS file is provided to interface with standard CANopen® configuration tools.
Applications
Commercial vehicles, Off-highway equipment, etc.
Mobile control panels
Power generation, Co-generation, Stationary power, etc.
Accessories
PL-DTM06-12SA, Mating Plug KIT (DTM06-12SA, WM-12S, 12 Contacts, 6 Plugs)
Datasheet
User Manual
EDS File
2D Drawing
STEP File
Compliance
4 Inputs, 8 Proportional Outputs Valve Controller, CANopen®
20 Channel Thermocouple Scanner, Full Isolation, SAE J1939
4 Digital Inputs Modbus Router, Modbus TCP/IP, SAE J1939
4 Universal Signal Outputs CAN Controller, CANopen®, Compact
4 Universal Input CAN Controller, +5V/8V Reference with Feedback Signal, CANopen®
Wire Harness (DTP06-4S Mating Plug, 2m (6.5ft.) 12 AWG Unterminated Wires)
4 Inputs, 4 Outputs Isolated Controller, SAE J1939
2 RTD Inputs, 2 Outputs Intelligent Load Control Switch, CANopen®, Modbus RTU, Ethernet, Wi-Fi
12 Inputs, 12 Proportional & 2 Relay Outputs Controller, 2 SAE J1939, Ethernet
Interface Module, 16 Inputs, 15 Outputs, SAE J1939
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories