CAN to 2 Analog/Digital Isolated Signals and 1 Relay Output Converter, Isolated SAE J1939, 1 Mbps
Item # AX130770-02 — CAN to 2 Analog/Digital Isolated Signals and 1 Relay Output Converter, Isolated SAE J1939, 1 Mbps
The CAN to 2 Analog/Digital Isolated Signals and 1 Relay Output Converter features 2 analog/digital signal outputs configurable as 0-5V, 0-10V, 0-20 mA, 4-20 mA, frequency, or PWM Signal as well as 1 relay output. Communication is over 1 isolated SAE J1939 port. It is operational 9…36 Vdc (12 Vdc or 24 Vdc). The Converter meets the surge requirements of SAE J1445 and is designed for EMC compliance. The controller is configured with the Axiomatic Electronic Assistant.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Technical Specifications
CAN to 2 Analog/Digital Isolated Signals and 1 Relay Output Converter
Order Code
P/N: AX130770-02
No. of Output(s)
3
Output(s)
2 analog/digital signal outputs are user selectable as follows:
Voltage (0-5 V, 0-10 V)
Current (0-20 mA, 4-20 mA)
Frequency or PWM (0.1 Hz to 20 kHz, 0-100% duty cycle)
1 Form C relay output
Communications
1 Isolated CAN (SAE J1939)
CAN Baud Rate
1 Mbit/s
Control Logic
Standard embedded software is provided.
Enclosure
High Temperature Nylon housing
TE Deutsch PCB Enclosure (EEC-325X4B)
4.677 x 5.236 x 1.417 inches
118.80 x 133.00 x 36.00 mm
(W x L x H excluding mating plugs)
Connection(s)
Integral TE Deutsch 12 pin receptacle (P/N: DTM13-12PA-R008).
Protection Rating
IP67
Operating Temperature
-40 to 85 ºC
-40 to 185 ºF
Compliance
CE / UKCA marking
Applications
Servo Applications
Throttle controls for marine engine applications.
Accessories
PL-DTM06-12SA, Mating Plug KIT (DTM06-12SA, WM-12S, 12 Contacts, 6 Plugs)
AX070502, Axiomatic Electronic Assistant KIT (AX070501 USB-CAN Converter, 2 Cables, Installation Instructions)
AX070506K, Axiomatic Electronic Assistant KIT III (AX070506 USB-CAN Converter, 3 Cables, Installation Instructions)
Datasheet
User Manual
2D Drawing
Step Files (3D)
10 Universal Signal Inputs Controller, +5V Reference, SAE J1939
4 Inputs, 8 Proportional Outputs Valve Controller, CANopen®
20 Channel Thermocouple Scanner, Full Isolation, SAE J1939
4 Digital Inputs Modbus Router, Modbus TCP/IP, SAE J1939
4 Universal Signal Outputs CAN Controller, CANopen®, Compact
4 Universal Input CAN Controller, +5V/8V Reference with Feedback Signal, CANopen®
Wire Harness (DTP06-4S Mating Plug, 2m (6.5ft.) 12 AWG Unterminated Wires)
4 Inputs, 4 Outputs Isolated Controller, SAE J1939
2 RTD Inputs, 2 Outputs Intelligent Load Control Switch, CANopen®, Modbus RTU, Ethernet, Wi-Fi
12 Inputs, 12 Proportional & 2 Relay Outputs Controller, 2 SAE J1939, Ethernet
Interface Module, 16 Inputs, 15 Outputs, SAE J1939
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories