18 Digital Signal Inputs CAN Controller, CANopen®
Item # AX030311 — 18 Digital Signal Inputs CAN Controller, CANopen®
The 18 Digital Signal Input Module accepts up to 10 digital type inputs (Active High/Active Low, digital, disabled PWM signal, Frequency, or counter). Up to 8 additional digital inputs are user selectable as Active High or Active Low. The electronic control can be connected to a variety of machine switches, sensors, PWM signals, etc. It interfaces with the machine’s CAN network (CANopen®). Standard embedded software is provided. Rugged enclosure in addition to a wide-ranging power supply input section for 12V or 24Vdc power suits applications in the harsh environment of mobile equipment with on-board battery power. All settings are user configurable.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Order Code
P/N: AX030311
Input(s)
10 digital inputs user selectable as follows.
Active High/Active Low
Digital
Disabled
PWM (signal from sensors or diesel engine ECMs)
Frequency (Hz or RPM)
Counter
8 digital inputs user selectable as Active High/Active Low
Communications
1 CAN port (CANopen®)
CAN Baud Rate
Configurable
Operating Voltage
12V, 24VDC Nominal
8…36VDC Power Supply Range
Control Logic
Standard embedded software is provided.
Enclosure
High temperature nylon housing
TE Deutsch P/N: EEC-325X4B
Protection Rating
IP67
Operating Temperature
-40 to 85 ºC
-40 to 85 ºF
Compliance
CE / UKCA marking
Exempt from Low Voltage Directive
User Configurability
An EDS file is provided to interface with standard CANopen® configuration tools.
Applications
Engine controls for commercial vehicles, off-highway equipment, etc.
Engine controls for power generation, co-generation, stationary power.
Accessories
PL-DTM06-12SA-12SB Mating Plug KIT (DTM06-12SA, DTM06-12SB, 2 WM-12S, 24 Contacts, Plugs)
Datasheet
User Manual
2D Drawing
Step Files (3D)
EDS
Related Products
21 Inputs, 4 Analog and 2 Relay Outputs Isolated Controller, 2x SAE J1939
4 Magnetic Pickup Inputs CAN Converter, SAE J1939
0-10VDC Analog Input, 0.13A Output Economy Valve Controller, DIN Rail Mount
3 Universal Inputs, H-Bridge Output, 5A Motor Controller, SAE J1939
4 Inputs, 8 Proportional Outputs Valve Controller, CANopen®
20 Channel Thermocouple Scanner, Isolated, SAE J1939
4 Digital Inputs Modbus Router, Modbus TCP/IP, SAE J1939
4 Universal Signal Outputs CAN Controller, CANopen®, Compact
4 Universal Input CAN Controller, +5V/8V Reference with Feedback Signal, CANopen®
Wire Harness (DTP06-4S Mating Plug, 2m (6.5ft.) 12 AWG Unterminated Wires)
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories
