2 Universal, Encoder and Magnetic Pick-up Sensor Inputs, Dual Valve Controller, SAE J1939, DIN Rail Mount, NFC
Item # AX022420 — 2 Universal, Encoder and Magnetic Pick-up Sensor Inputs, Dual Valve Controller, SAE J1939, DIN Rail Mount, NFC
The Universal Valve Controller is designed for extremely versatile control of up to two proportional outputs to directly drive coils or other loads. Its flexible circuit design gives the user a wide range of configurable input or output types. The sophisticated control algorithms allow the user to program the controller for a wide range of applications without the need for custom software. The controller has two fully programmable universal inputs that can be setup to read: voltage, current, resistive, frequency, or digital input signals. It also interfaces with a magnetic pick up sensor and an encoder. There are also two universal outputs that can be setup to drive: proportional current (up to 3 A each); hotshot digital current; proportional voltage (up to supply); proportional PWM; or straight on/off digital loads. The universal output type is user selectable as high side, low side or half bridge output. All I/O ports on the unit are independent from one another. The valve driver is a highly programmable controller, allowing the user to configure it for their application. Its sophisticated control algorithms allow for open or closed loop drive of the proportional outputs. It can be operated as either a self-contained control system, driving the outputs directly from the on-board inputs, and/or it can be integrated into a CAN J1939 network of controllers. All I/O and logical function blocks on the unit are inherently independent from one another but can be programmed to interact in many ways. The valve controller has several built-in protections that can shut off the outputs in adverse conditions. They include hardware shutoffs to protect the circuits from being damaged as well as software shutdown features that can be enabled in safety critical systems. Setpoints are user configurable using E-Write NFC Android Application and for complex control profiles, the Electronic Assistant. A rugged power supply interface accepts 12 or 24 VDC nominal for battery powered machine applications. LED’s indicate operational status. The enclosure is DIN rail mount. It operates from -40 to 85°C (-40 to 185°F). The sophisticated control algorithms allow the user to program the controller for a wide range of applications without the need for customer software.
The E-Write NFC application for Android and iOS devices is available for download from the Google Play Store and the Apple App Store for a fee.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Downloads
Datasheet
User Manual
2D Drawing
STEP File
Compliance
Related Products
Center Bonded Mounts STA Series
All Product Categories
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories
- Flat Top Recessed Bumpers
- Rounded Top Recessed Bumpers
- Large Bumper Pads
- Grommet Bumper A
- Flat Top Recessed Bumpers
- Rounded Top Recessed Bumpers
- Large Bumper Pads
- Grommet Bumper A
- Flat Top Recessed Bumpers
- Rounded Top Recessed Bumpers
- Large Bumper Pads
- Grommet Bumper A
- Flat Top Recessed Bumpers
- Rounded Top Recessed Bumpers
- Large Bumper Pads
- Grommet Bumper A
