1 Thermocouple, 2 Universal Inputs CAN Controller, CANopen®
Item # AX189001 — 1 Thermocouple, 2 Universal Inputs CAN Controller, CANopen®
This Thermocouple Module monitors 1 channel of type B, E, J, K, N, R, S, or T thermocouples. 2 universal signal inputs are configurable as Voltage, Current, PWM, Digital, or Resistive (for Input 1 only). The temperature information is provided to the engine control system over an isolated CAN (CANopen®) bus. Temperature information can include exhaust temperature, winding temperature, and fluid temperature monitoring. All channels are fully isolated. Temperature data is automatically sent over the CAN bus when power is applied. The input is isolated. Integral diagnostics can flag open wire fault detection. The product enclosure is rated as IP67 and has a 12-pin TE Deutsch style connector.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Input(s)
1 channel for thermocouple input (Type B, E, J, K, N, R, S, or T)
1 universal input user configurable as follows.
0-1V, 0-2.5V, 0-5V, 0-10V
0-20mA, 4-20mA
10 Ohm to 250 kOhm
Frequency (1Hz-10kHz)
PWM (1Hz-10kHz, 0-100%)
Digital (Active High or Active Low)
Communications
2 Isolated CAN ports (CANopen®)
Operating Voltage
12V, 24V or 48Vdc Nominal (9…60Vdc Power Supply Range)
Control Logic
Standard embedded software is provided.
Enclosure
Plastic enclosure, ultrasonically welded
Nylon 6-6 with 30% glass fill
Integral connector
Connection(s)
Integral TE Deutsch 12 pin Receptacle.
Protection Rating
IP67
Operating Temperature
-40 to 70 ºC
-40 to 158 ºF
User Configurability
An EDS file is provided to interface with standard CANopen® configuration tools.
Applications
Power Generator Sets
Machine Engine Monitoring Systems
Accessories
PL-DTM06-12SA, Mating Plug KIT (DTM06-12SA, WM-12S, 12 Contacts, 6 Plugs)
Datasheet
User Manual
EDS File
2D Drawing
Compliance
Related Products
RS-232 to CAN (SAE J1939) Converter, 2 Digital Inputs, Programmable “Frame Format”, ASCII Support
2 Universal Inputs, 10A H-Bridge Output Controller, SAE J1939
Dual Universal Signal Converter, Isolated, CANopen®
Dual Universal Signal Converter, Isolated, SAE J1939
21 Inputs, 4 Analog & 2 Relay Outputs Isolated Controller, 2x SAE J1939
4 Magnetic Pickup Inputs CAN Converter, SAE J1939
0-10VDC Analog Input, 0.13A Output Economy Valve Controller, DIN Rail Mount
3 Universal Inputs, H-Bridge Output, 5A Motor Controller, SAE J1939
4 Inputs, 8 Proportional Outputs Valve Controller, CANopen®
20 Channel Thermocouple Scanner, Isolated, SAE J1939
4 Digital Inputs Modbus Router, Modbus TCP/IP, SAE J1939
4 Universal Signal Outputs CAN Controller, CANopen®, Compact
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories
