2 Thermocouple Inputs CAN Controller, CANopen®
Item # AX188001 — 2 Thermocouple Inputs CAN Controller, CANopen®
The Thermocouple Module monitors up to 2 channels of Type J, K, B, E, N, R, S or T thermocouples (others on request). The temperature information is provided to the engine control system over CANopen® bus. Temperature information can include exhaust temperature, winding temperature, and fluid temperature monitoring. All channels are fully isolated and measure temperatures at the same time. Temperature data is automatically sent over the CAN bus when power is applied.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Technical Specifications
Thermocouple Module, 2 Channel, CANopen
Order Code
P/N: AX188001 (Thermocouple Module, 6 Channels, CANopen)
Input(s)
2 channels for thermocouple inputs (Type B, E, J, K, N, R, S, or T)
CAN Port(s)
1 CANopen® port
Operating Voltage
12V or 24Vdc nominal
Isolation
Full isolation of each channel from the CAN line, other inputs, and power supply.
Enclosure
Plastic enclosure, ultrasonically welded
Nylon 6-6 with 30% glass fill
Integral connector
Connection(s)
1 8-pin connector equivalent to the TE Deutsch P/N: DT04-08PA
Protection Rating
IP67
Operating Temperature
-40 to 85 ºC
-40 to 185 ºF
Applications
Power Generator Sets
Accessories
AX070112, Mating Plug Kit (DT06-08SA, W8S, 8 Contacts, 6 Plugs)
Datasheet
User Manual
EDS File
2D Drawing
Compliance
Related Products
0-10VDC Analog Input, 0.13A Output Economy Valve Controller, DIN Rail Mount
4 Inputs, 8 Proportional Outputs Valve Controller, CANopen®
20 Channel Thermocouple Scanner, Full Isolation, SAE J1939
4 Digital Inputs Modbus Router, Modbus TCP/IP, SAE J1939
4 Universal Signal Outputs CAN Controller, CANopen®, Compact
4 Universal Input CAN Controller, +5V/8V Reference with Feedback Signal, CANopen®
Wire Harness (DTP06-4S Mating Plug, 2m (6.5ft.) 12 AWG Unterminated Wires)
4 Inputs, 4 Outputs Isolated Controller, SAE J1939
2 RTD Inputs, 2 Outputs Intelligent Load Control Switch, CANopen®, Modbus RTU, Ethernet, Wi-Fi
12 Inputs, 12 Proportional & 2 Relay Outputs Controller, 2 SAE J1939, Ethernet
Interface Module, 16 Inputs, 15 Outputs, SAE J1939
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories