12 Inputs, 8 Analog and 1 Relay Output I/O Module, SAE J1939, 1 Mbps
Item # AX030210-02 — 12 Inputs, 8 Analog and 1 Relay Output I/O Module, SAE J1939, 1 Mbps
AX030210-02 can extend machine control networks by adding I/O to the CAN bus. The I/O module features one isolated SAE J1939 CAN port for user-defined communications over the bus, accepts up to ten analog, digital, PWM, pulse, or counter inputs, and provides two +5 V or +10 V voltage references to power external sensors. Additional digital and resistive inputs allow for more interfaces. Each input can be configured to measure the input value and send the data to an SAE J1939 CAN network. AX030210-02 supports a baud rate of 1 Mbit/s and is user configurable via the Axiomatic Electronic Assistant (sold separately). The I/O control provides eight analog outputs and one Form C relay output. Diagnostic messages are provided over the CAN network for the status of inputs or outputs. The rugged IP67-rated enclosure and 12 or 24 VDC nominal voltage required to operate makes the unit suitable for the demands of power generation and large engine applications.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Technical Specifications
12 Inputs, 8 Analog and 1 Relay Output I/O Module, SAE J1939, 1 Mbps
Order Code
P/N: AX030210-02
Input(s)
1 digital input as active high or active low
1 resistive input, self-calibrating from 25 Ω to 250 kΩ
10 universal signal inputs are user selectable as follows:
Voltage (0-5 V, 0-10 V)
Current (4-20 mA, 0-20 mA)
PWM (0.5-10,000 Hz)
Digital (active high, active low)
Pulse (Hz or RPM)
Counter (16-bit)
Output(s)
8 outputs programmable as voltage (0-5 V, 0-10 V) or current (0-20 mA, 4-20 mA)
1 Form C relay output (NC)
Reference Voltage(s)
2x +5V/+10V references
CAN Port(s)
1 SAE J1939 port
CAN Baud Rate
1 Mbit/s
Operating Voltage
12/24 VDC nominal (8-36 VDC)
Isolation
300 VRMS isolation for the CAN port
Control Logic
Standard embedded logic is provided.
Device functionality is user programmable.
Enclosure
Aluminum extrusion with stainless steel end plates
Gaskets are open cell neoprene
Connection(s)
1x 8-pin connector, TE Deutsch P/N: DT13-08PA
1x 40-pin connector, TE Deutsch P/N: DRC13-40PA
Protection Rating
IP67, the unit is conformally coated within the housing
IP56 tested for marine type approval
Operating Temperature
-40 to 85 ºC
-40 to 185 ºF
User Interface
Programmable using the Axiomatic Electronic Assistant KIT, P/N: AX070506K
Applications
Cogeneration
Large engines
Power generation
Stationary power
Accessories
AX070200, Plug Kit (DRC16-40S Connector, DT06-08SA Plug, W8S Wedgelock, Size 16 Sockets, Size 12-16 Sealing Plugs)
Configuration Accessories
AX070506K, Axiomatic Electronic Assistant KIT (AX070506 USB-CAN Converter, 3 Cables, Installation Instructions)
Datasheet
User Manual
2D Drawing
Marine Type Approval(s)
Related Products
12 Inputs, 8 Analog and 1 Relay Output I/O Module, SAE J1939, 1 Mbps
12 Inputs, 8 Analog and 1 Relay Output I/O Module, SAE J1939, 500 kbps
2 Pt1000 RTD & 2 PTC Thermistor Inputs Controller, SAE J1939, Wake-on-CAN
1 Digital Input, 2 Relay Outputs Controller, SAE J1939, 1 Mbps, DIN Rail
1 Digital Input, 2 Relay Outputs Controller, SAE J1939, 500 kbps, DIN Rail
1 Digital Input, 2 Relay Outputs Controller, SAE J1939, 250 kbps, DIN Rail
1 Relay & 2 Universal Outputs Controller, SAE J1939
0-5VDC to 4-20mA Signal Converter, +5V Reference
4 Inputs, 2 Bidirectional 600mA Outputs Valve Controller, +5V Reference, SAE J1939, NFC, DIN Rail Mount
4 Magnetic Pickup Inputs CAN Converter, CANopen®
21 Inputs, 4 Analog & 2 Relay Outputs Isolated Controller, 2x CANopen®
10 Universal Signal Input Controller, +5V Reference, CANopen®
10 Universal Signal Inputs Controller, +5V Reference, SAE J1939
1 Digital Input, 2 Analog Outputs, 2.5A H-Bridge Controller, CANopen®
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories
