6 Input, 5 Output Valve Controller, SAE J1939, 250 kbps
Item # AX020510 — 6 Input, 5 Output Valve Controller, SAE J1939, 250 kbps
The valve controller provides precise, repeatable control of 5 proportional or on/off solenoids over a SAE J1939 network. PWM signal inputs or analog voltage or current inputs are accepted for interface to a PLC, Engine Control Module or command potentiometers. Multiple switched inputs are provided to suit a range of applications. Each can be configured to measure the input value, and send the data to a SAE J1939 CAN network. In addition, any output on the controller could be configured to use any of the on board inputs as either a control signal or an enable signal, instead of taking the control information from the CAN bus. Diagnostics messages are provided over the CAN network for the status of inputs or outputs. Settings are user configurable via a Windows-based Electronic Assistant configuration tool interfacing to the controller via an USB-CAN device to suit a wide variety of applications.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Order Code
P/N: AX020510
Input(s)
Up to 6 inputs are selectable by the user from the following:
4 Analog/Digital/PWM Inputs
2 Frequency/Digital Inputs
All inputs, except for frequency and counter, are sampled every 10ms.
Output(s)
5 Independent outputs for hydraulic valves (0…2.5A) are user selectable from the following:
Proportional Current
Hotshot Digital
PWM Duty Cycle
Proportional Voltage
On/Off Digital
CAN Port(s)
1 SAE J1939 port
Operating Voltage
12/24 VDC nominal (8-36 VDC)
Control Logic
Standard embedded software is provided.
The user programmable functionality is accessible using the Axiomatic Electronic Assistant (EA), P/N: AX070502 or P/N: AX070506K
Enclosure
High temperature nylon housing, TE Deutsch P/N: EEC-325X4B
Operating Temperature
-40 to 85 ºC
-40 to 185 ºF
Accessories
PL-DTM06-12SA-12SB, Mating Plug KIT (DTM06-12SA, DTM06-12SB, 2 WM-12S, 24 Contacts, 18 Plugs)
AX070502, Axiomatic Electronic Assistant KIT (AX070501 USB-CAN Converter, 2 Cables, Installation Instructions)
AX070506K, Axiomatic Electronic Assistant KIT III (AX070506 USB-CAN Converter, 3 Cables, Installation Instructions)
Datasheet
User Manual
2D Drawing
STEP File
Compliance
10 Universal Signal Inputs Controller, +5V Reference, SAE J1939
4 Inputs, 8 Proportional Outputs Valve Controller, CANopen®
20 Channel Thermocouple Scanner, Full Isolation, SAE J1939
4 Digital Inputs Modbus Router, Modbus TCP/IP, SAE J1939
4 Universal Signal Outputs CAN Controller, CANopen®, Compact
4 Universal Input CAN Controller, +5V/8V Reference with Feedback Signal, CANopen®
Wire Harness (DTP06-4S Mating Plug, 2m (6.5ft.) 12 AWG Unterminated Wires)
4 Inputs, 4 Outputs Isolated Controller, SAE J1939
2 RTD Inputs, 2 Outputs Intelligent Load Control Switch, CANopen®, Modbus RTU, Ethernet, Wi-Fi
12 Inputs, 12 Proportional & 2 Relay Outputs Controller, 2 SAE J1939, Ethernet
Interface Module, 16 Inputs, 15 Outputs, SAE J1939
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories