1 Thermocouple, 12 Digital, 3 Universal Signal Inputs Controller, CANopen®, +5V Ref
Item # AX030341 — 1 Thermocouple, 12 Digital, 3 Universal Signal Inputs Controller, CANopen®, +5V Ref
The AX030341 controller has 1 thermocouple (TC) input and 12 digital inputs that can read digital ON/OFF signals. It also has an additional 3 fully programmable universal inputs that can be setup to read voltage, current, resistive, PWM, frequency, or digital ON/OFF. The controller operates with a power supply voltage of 12, 24, or 48 VDC nominal and features one +5 V reference to power a sensor input. The unit carries CE / UKCA markings. The powerful control algorithms allow the user to program the controller for a wide range of applications without the need for custom software. All I/O and logical function blocks on the unit are inherently independent from one another but can be programmed to interact in many ways. An EDS file is provided and AX030341 is user configurable using standard CANopen® tools.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Technical Specifications
1 Thermocouple, 12 Digital, 3 Universal Signal Inputs Controller, CANopen®, +5 V Ref
Order Code
P/N: AX030341
Input(s)
1 thermocouple input (type E, J, or K)
12 digital inputs (active high/low or disable)
3 universal signal inputs, user selectable as follows:
Voltage (0-5 V, 0-10 V)
Current (0-20 mA, 4-20 mA)
Resistive (20 Ω to 200 kΩ)
Frequency/PWM (1 Hz to 20 kHz)
Digital (discrete voltage level)
CAN Port(s)
1 CANopen® port
CAN Baud Rate
Selectable
Operating Voltage
12/24/48 VDC nominal (8-80 VDC)
Isolation
200 Vrms
The thermocouple channel is fully isolated from the CAN line, other inputs, and the power supply
Control Logic
Standard embedded software is provided.
The user programmable functionality is accessible via standard CANopen® configuration tools (not supplied).
Enclosure
High temperature nylon housing, TE Deutsch P/N: EEC-325X4B
Connection(s)
1x 24-pin connector, TE Deutsch P/N: DTM13-12PA-12PB-R008
Protection Rating
IP67, PCB is conformal coated and protected by the housing.
Operating Temperature
-40 to 85 ºC
-40 to 185 ºF
Applications
Designed for engine control in contexts such as:
Co-generation
Commercial vehicles
Off-highway equipment
Power generation
Stationary power
Accessories
PL-DTM06-12SA-12SB Mating Plug KIT (DTM06-12SA, DTM06-12SB, 2 WM-12S, 24 Contacts, Plugs)
Datasheet
User Manual
EDS File
STEP File
Compliance
4 Inputs, 8 Proportional Outputs Valve Controller, CANopen®
20 Channel Thermocouple Scanner, Full Isolation, SAE J1939
4 Digital Inputs Modbus Router, Modbus TCP/IP, SAE J1939
4 Universal Signal Outputs CAN Controller, CANopen®, Compact
4 Universal Input CAN Controller, +5V/8V Reference with Feedback Signal, CANopen®
Wire Harness (DTP06-4S Mating Plug, 2m (6.5ft.) 12 AWG Unterminated Wires)
4 Inputs, 4 Outputs Isolated Controller, SAE J1939
2 RTD Inputs, 2 Outputs Intelligent Load Control Switch, CANopen®, Modbus RTU, Ethernet, Wi-Fi
12 Inputs, 12 Proportional & 2 Relay Outputs Controller, 2 SAE J1939, Ethernet
Interface Module, 16 Inputs, 15 Outputs, SAE J1939
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories