1 Thermocouple, 2 Universal Inputs CAN Controller, SAE J1939
Item # AX189000 — 1 Thermocouple, 2 Universal Inputs CAN Controller, SAE J1939
This Thermocouple Module monitors 1 channel of type B, E, J, K, N, R, S, or T thermocouples. 2 universal signal inputs are configurable as Voltage, Current, PWM, Digital, or Resistive (for Input 1 only). The temperature information is provided to the engine control system over an isolated CAN (SAE J1939) bus. Temperature information can include exhaust temperature, winding temperature, and fluid temperature monitoring. All channels are fully isolated. Temperature data is automatically sent over the CAN bus when power is applied. The input is isolated. Integral diagnostics can flag open wire fault detection. The product enclosure is rated as IP67 and has a 12-pin TE Deutsch style connector.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Order Code
P/N: AX189000 (Thermocouple Module, 1 TC, 2 Universal Signal, 2 SAE J1939, Auto-baud-rate Detect)
Input(s)
1 channel for thermocouple input (Type B, E, J, K, N, R, S, or T)
1 universal input user configurable as follows.
0-1V, 0-2.5V, 0-5V, 0-10V
0-20mA, 4-20mA
10 Ohm to 250 kOhm
Frequency (1Hz-10kHz)
PWM (1Hz-10kHz, 0-100%)
Digital (Active High or Active Low)
Communications
2 Isolated CAN ports (SAE J1939)
Operating Voltage
12V, 24V or 48Vdc Nominal (9…60Vdc Power Supply Range)
Control Logic
Standard embedded software is provided.
Enclosure
Plastic enclosure, ultrasonically welded
Nylon 6-6 with 30% glass fill
Integral connector
Connection(s)
Integral TE Deutsch 12 pin Receptacle.
Operating Temperature
-40 to 70 ºC
-40 to 158 ºF
Applications
Power Generator Sets
Machine Engine Monitoring Systems
Accessories
PL-DTM06-12SA, Mating Plug KIT (DTM06-12SA, WM-12S, 12 Contacts, 6 Plugs)
AX070502, Axiomatic Electronic Assistant KIT (AX070501 USB-CAN Converter, 2 Cables, Installation Instructions)
AX070506K, Axiomatic Electronic Assistant KIT III (AX070506 USB-CAN Converter, 3 Cables, Installation Instructions)
Datasheet
User Manual
2D Drawing
Compliance
4 Inputs, 8 Proportional Outputs Valve Controller, CANopen®
20 Channel Thermocouple Scanner, Full Isolation, SAE J1939
4 Digital Inputs Modbus Router, Modbus TCP/IP, SAE J1939
4 Universal Signal Outputs CAN Controller, CANopen®, Compact
4 Universal Input CAN Controller, +5V/8V Reference with Feedback Signal, CANopen®
Wire Harness (DTP06-4S Mating Plug, 2m (6.5ft.) 12 AWG Unterminated Wires)
4 Inputs, 4 Outputs Isolated Controller, SAE J1939
2 RTD Inputs, 2 Outputs Intelligent Load Control Switch, CANopen®, Modbus RTU, Ethernet, Wi-Fi
12 Inputs, 12 Proportional & 2 Relay Outputs Controller, 2 SAE J1939, Ethernet
Interface Module, 16 Inputs, 15 Outputs, SAE J1939
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories