10 Universal Signal Input CAN Controller, +5V Ref., SAE J1939
Item # AX030130 — 10 Universal Signal Input CAN Controller, +5V Ref., SAE J1939
The 10 Universal Signal Input Module accepts up to 10 analog or digital type inputs (0- 5V, 0-10V, 0-20 mA or 4-20 mA, Digital, PWM, Frequency/RPM, or Counter). The modules can be connected to a variety of analog machine sensors or levers, PLCs, switches, PWM signals, etc. It interfaces with the machine’s SAE J1939 network. Standard embedded software is provided. Rugged IP67 rated packaging in addition to a wide-ranging power supply input section for 12V or 24Vdc power suits applications in the harsh environment of mobile equipment with on-board battery power. All setpoints are user configurable.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Order Code
P/N: AX030130
No. of Input(s)
10
Input(s)
10 signal inputs, user selectable as follows:
Voltage (0-5 V, 0-10 V)
Current (0-20 mA, 4-20 mA)
PWM (high or low frequency, 0-100%)
Frequency/RPM (up to 10,000 Hz)
Counter
Digital (10 kΩ pull-up/pull-down)
Reference Voltage(s)
1 +5V, 100 mA
Communications
1 CAN port (2.0B, SAE J1939) with Auto-Baud-Rate Detection
Operating Voltage
8…60 VDC Power Supply Range
12VDC or 24VDC Nominal Operating Voltage
Control Logic
Standard embedded software is provided.
Enclosure
High temperature nylon housing
TE Deutsch P/N: EEC-325X4B
Protection Rating
IP67, Unit is Conformal Coated in the Housing
Operating Temperature
-40 to 85 ºC
-40 to 185 ºF
Applications
Commercial Vehicles
Material Handling Equipment
Power Generation
Standby Generators
Off-highway Construction Equipment
Forestry Mining and Military Vehicles
Accessories
PL-DTM06-12SA-12SB, Mating Plug KIT (DTM06-12SA, DTM06-12SB, 2 WM-12S, 24 Contacts, 18 Plugs)
AX070502, Axiomatic Electronic Assistant KIT (AX070501 USB-CAN Converter, 2 Cables, Installation Instructions)
AX070506K, Axiomatic Electronic Assistant KIT III (AX070506 USB-CAN Converter, 3 Cables, Installation Instructions)
Datasheet
User Manual
2D Drawing
Step Files (3D)
4 Inputs, 8 Proportional Outputs Valve Controller, CANopen®
20 Channel Thermocouple Scanner, Full Isolation, SAE J1939
4 Digital Inputs Modbus Router, Modbus TCP/IP, SAE J1939
4 Universal Signal Outputs CAN Controller, CANopen®, Compact
4 Universal Input CAN Controller, +5V/8V Reference with Feedback Signal, CANopen®
Wire Harness (DTP06-4S Mating Plug, 2m (6.5ft.) 12 AWG Unterminated Wires)
4 Inputs, 4 Outputs Isolated Controller, SAE J1939
2 RTD Inputs, 2 Outputs Intelligent Load Control Switch, CANopen®, Modbus RTU, Ethernet, Wi-Fi
12 Inputs, 12 Proportional & 2 Relay Outputs Controller, 2 SAE J1939, Ethernet
Interface Module, 16 Inputs, 15 Outputs, SAE J1939
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories