2 Thermocouple Inputs CAN Controller, SAE J1939, 1 Mbps
Item # AX188000-02 — 2 Thermocouple Inputs CAN Controller, SAE J1939, 1 Mbps
The Thermocouple Module monitors up to 2 channels of Type B, E, J, K, N, R, S, or T thermocouples (others on request). The temperature information is provided to the engine control system over SAE J1939 CAN bus. Temperature information can include exhaust temperature, winding temperature, and fluid temperature monitoring. All channels are fully isolated and measure temperatures at the same time. Temperature data is automatically sent over the CAN bus when power is applied. During set-up, the operator can configure the controller via the Axiomatic Electronic Assistant to suit a wide variety of applications.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Order Code
P/N: AX188000-02
Input(s)
2 channels for thermocouple inputs (Type B, E, J, K, N, R, S, or T)
CAN Port(s)
1 SAE J1939 port
CAN Baud Rate
1 Mbit/s
Operating Voltage
12 or 24VDC nominal
Isolation
Full isolation of each channel from the CAN line, other inputs, and power supply.
Enclosure
Plastic enclosure, ultrasonically welded
Nylon 6-6 with 30% glass fill
Integral connector
Connection(s)
1 8-pin connector equivalent to the TE Deutsch P/N: DT04-08PA
Protection Rating
IP67
Operating Temperature
-40 to +85 ºC
-40 to 185 ºF
Applications
Power Generator Sets
Accessories
Datasheet
User Manual
2D Drawing
STEP File
Compliance
4 Inputs, 8 Proportional Outputs Valve Controller, CANopen®
20 Channel Thermocouple Scanner, Full Isolation, SAE J1939
4 Digital Inputs Modbus Router, Modbus TCP/IP, SAE J1939
4 Universal Signal Outputs CAN Controller, CANopen®, Compact
4 Universal Input CAN Controller, +5V/8V Reference with Feedback Signal, CANopen®
Wire Harness (DTP06-4S Mating Plug, 2m (6.5ft.) 12 AWG Unterminated Wires)
4 Inputs, 4 Outputs Isolated Controller, SAE J1939
2 RTD Inputs, 2 Outputs Intelligent Load Control Switch, CANopen®, Modbus RTU, Ethernet, Wi-Fi
12 Inputs, 12 Proportional & 2 Relay Outputs Controller, 2 SAE J1939, Ethernet
Interface Module, 16 Inputs, 15 Outputs, SAE J1939
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories