4 Channel Strain Gauge CAN Controller with Wire Break Detection, CANopen®
Item # AX200301 — 4 Channel Strain Gauge CAN Controller with Wire Break Detection, CANopen®
The 4 Channel Strain Gauge CAN controller with Wire Break Detection accepts up to four 4-wire strain gauge connections. The input range is user selectable from +/-19.5 mV to +/-2.5 V. It interfaces with the machine’s CAN network (CANopen®). The measurement rate is up to 40,000 samples per second (SPS). Standard embedded software is provided. Rugged IP67 rated enclosure and a power supply input of 12Vdc or 24Vdc nominal suits applications in the harsh environment of mobile equipment with on-board battery power. Settings are user configurable.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Order Code
P/N: AX200301
Input(s)
1 digital input (Active High or Active Low)
Strain Gauge Inputs
4 channels for inputs from 4-wire full bridge strain gauges:+/- 19.5 mV to +/- 2.5 Vdc (Selectable).
Excitation Connections
4 +5V Excitation Connections
Wire Break Detection
Provided
Output(s)
1 analog/digital output selectable as follows.
0-10V
0-24mA
Digital On/Off
1 interlock relay output with 2 contact pins
Communications
1 CAN port (CANopen®)
Operating Voltage
12 or 24Vdc Nominal Operating Voltage
8…36 Vdc Power Supply Range for Voltage Transients
Control Logic
Standard embedded software is provided.
Enclosure
High temperature nylon housing
TE Deutsch P/N: EEC-325X4B
Connection(s)
1x 24-pin connector, TE Deutsch P/N: DTM13-12PA-12PB-R008
Protection Rating
IP67
Operating Temperature
-40 to 85 ºC
-40 to 185 ºF
User Configurability
An EDS file is provided to interface with standard CANopen® configuration tools.
Applications
Construction equipment
Lift equipment
Cranes
Accessories
PL-DTM06-12SA-12SB Mating Plug KIT (DTM06-12SA, DTM06-12SB, 2 WM-12S, 24 Contacts, Plugs)
Datasheet
User Manual
EDS File
2D Drawing
Step Files (3D)
Compliance
Related Products
0-5VDC to 4-20mA Signal Converter, +5V Reference
4 Inputs, 2 Bidirectional 600mA Outputs Valve Controller, +5V Reference, SAE J1939, NFC, DIN Rail Mount
4 Magnetic Pickup Inputs CAN Converter, CANopen®
21 Inputs, 4 Analog & 2 Relay Outputs Isolated Controller, 2x CANopen®
10 Universal Signal Input Controller, +5V Reference, CANopen®
10 Universal Signal Inputs Controller, +5V Reference, SAE J1939
1 Digital Input, 2 Analog Outputs, 2.5A H-Bridge Controller, CANopen®
1 Digital Input, 2 Analog Outputs, 5A H-Bridge Controller, SAE J1939
1 Digital Input, 2 Analog Outputs, 5A H-Bridge Controller, CANopen®
RS-232 to CAN (SAE J1939) Converter, 2 Digital Inputs, Programmable “Frame Format”, ASCII Support
2 Universal Inputs, 10A H-Bridge Output Controller, SAE J1939
Dual Universal Signal Converter, Isolated, CANopen®
Dual Universal Signal Converter, Isolated, SAE J1939
21 Inputs, 4 Analog & 2 Relay Outputs Isolated Controller, 2x SAE J1939
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories
