5-10 Sec, 650 mA Soft Shift Controller, DIN 43650A
Item # SSD-H-2-02-650MA-2M — 5-10 Sec, 650 mA Soft Shift Controller, DIN 43650A
The Soft Shift Controller introduces a current ramp permitting the soft start of proportional solenoid valves used for pressure or flow control in hydraulic circuits. When the unit is powered on, it ramps to full current output over the ramp on time period that is adjustable within a factory set range. When the power is switched off, output of the unit falls immediately to zero. It is available in an IP65 rated DIN 43650 coil mount version.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Technical Specifications
5-10 Sec, 650 mA Soft Shift Controller, DIN 43650A
Order Code
P/N: SSD-H-2-02-650MA-2M
Dither Amplitude Fixed
10 % of Maximum Rated Current (Fixed)
Ramp On Time
Increasing 5-10 seconds or customer specified range
Current Dither Frequency Fixed
250 Hz (Fixed) +/- 10%
Output Current
650 mA
Operating Voltage
9-32 VDC
Connection(s)
DIN 43650A plug
2m, unterminated jacketed cable
18 AWG conductors
Protection Rating
IP65 when correctly installed with lid, compression washer, o-ring and base gasket.
Operating Temperature
-40 to 85 ºC
-40 to 185 ºF
Applications
A Cost effective alternative for soft start of proportional hydraulic circuits
Datasheet
Compliance
10 Universal Signal Inputs Controller, +5V Reference, SAE J1939
4 Inputs, 8 Proportional Outputs Valve Controller, CANopen®
20 Channel Thermocouple Scanner, Full Isolation, SAE J1939
4 Digital Inputs Modbus Router, Modbus TCP/IP, SAE J1939
4 Universal Signal Outputs CAN Controller, CANopen®, Compact
4 Universal Input CAN Controller, +5V/8V Reference with Feedback Signal, CANopen®
Wire Harness (DTP06-4S Mating Plug, 2m (6.5ft.) 12 AWG Unterminated Wires)
4 Inputs, 4 Outputs Isolated Controller, SAE J1939
2 RTD Inputs, 2 Outputs Intelligent Load Control Switch, CANopen®, Modbus RTU, Ethernet, Wi-Fi
12 Inputs, 12 Proportional & 2 Relay Outputs Controller, 2 SAE J1939, Ethernet
Interface Module, 16 Inputs, 15 Outputs, SAE J1939
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories