Dual Valve Controller, Plug-In, CANopen®
Item # AX022311 — Dual Valve Controller, Plug-In, CANopen®
The Dual Plug-In Hydraulic Valve Controller is a user programmable distributed electronic control. Its sophisticated control algorithms allow for open or closed loop drive of the proportional outputs to actuate hydraulic solenoids. The AX022311 controller is designed to be mounted directly on the hydraulic valve with molded TE Deutsch equivalent connectors and provides distributed control on the mobile machine. The hydraulic valve controller is integrated into a CANopen® network. All outputs and logical function blocks on the unit are inherently independent from one another, but can be programmed to interact in a number of ways. As an electrohydraulic component, it provides precise, repeatable electronic control of 2 proportional or on/off hydraulic valves in response to CAN message. It is ruggedly packaged with IP67 protection. The controller is designed to meet the rugged demands of mobile equipment, oil and gas equipment, and heavy duty industrial machine applications.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Order Code
P/N: AX022311 (CANopen®)
Output(s)
2 signal outputs, user selectable as follows:
Voltage
Current
PWM
Hotshot on/off
Digital on/off
High side sourcing (up to 2.5 A)
Communications
1 CAN port (CANopen®)
Operating Voltage
12/24 VDC nominal (9-32 VDC)
Control Logic
Standard embedded software is provided.
The user programmable functionality is accessible via standard CANopen® configuration tools (not supplied).
Enclosure
Molded enclosure, integral connectors
Polyester, 15% glass
Silicone seals
Connection(s)
1 6-pin integral connector, equivalent to TE Deutsch P/N: DT04-6P
1 2-pin integral connector, equivalent to TE Deutsch P/N: DT06-2S
Protection Rating
IP67
Operating Temperature
-40 to 85 ºC
-40 to 185 ºF
Applications
Applications include, but are not limited to:
Dual solenoid hydraulic valve control
Hydraulic fan drive control
Low-speed control vehicle transmission control
Single solenoid hydraulic valve flow or pressure control
Accessories
AX070119, Mating Plug Kit (DT06-6S, W6S, 6 Contacts)
Datasheet
User Manual
2D Drawing
EDS File
STEP File
4 Inputs, 8 Proportional Outputs Valve Controller, CANopen®
20 Channel Thermocouple Scanner, Full Isolation, SAE J1939
4 Digital Inputs Modbus Router, Modbus TCP/IP, SAE J1939
4 Universal Signal Outputs CAN Controller, CANopen®, Compact
4 Universal Input CAN Controller, +5V/8V Reference with Feedback Signal, CANopen®
Wire Harness (DTP06-4S Mating Plug, 2m (6.5ft.) 12 AWG Unterminated Wires)
4 Inputs, 4 Outputs Isolated Controller, SAE J1939
2 RTD Inputs, 2 Outputs Intelligent Load Control Switch, CANopen®, Modbus RTU, Ethernet, Wi-Fi
12 Inputs, 12 Proportional & 2 Relay Outputs Controller, 2 SAE J1939, Ethernet
Interface Module, 16 Inputs, 15 Outputs, SAE J1939
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories